WilliamLam.com

Visualizing live network traffic on the vCenter Server Appliance using net-glimpse

by // 2 Comments

Last week I came across a really interesting OSS project called net-glimpse which allows you to easily visualize your network traffic in real-time and making that available using any standard web browser. I thought it would be neat to see what this might look like running on the vCenter Server Appliance (VCSA). I got it up in running in just a couple of minutes and even shared the results on Twitter as you can see from the tweet below:


I had couple of folks ask about the setup and I figure I would post a quick write up. While looking at the project, I found that net-glimpse includes quite a bit of customizations in the colors, data collection and how data is displayed. Specifically, rather than relying on the well-known ports that have already been pre-defined, you can also add additional custom ports and specify the label that it should automatically used. This gave me an idea, instead of a generic visualization of the VCSA, we could get specific service information and have those label automatically get displayed.

[Read more...]

Introducing Alexa to a few more VMware APIs

by // 3 Comments

Over the weekend, while taking a break from putting together some furniture as it was my time for my daughters nap, I got that the chance to explore and create a new Alexa Skill which integrates with a few of VMware's APIs. This has been something I wanted to try out for some time but have not had any spare time. I had even purchased an Amazon Echo Dot but its just currently being used as a music player for the family. A couple of weeks back I saw an awesome blog post from Cody De Arkland where he demonstrates how to easily integrate the new vCenter Server 6.5 REST APIs into an Alexa Skill which can then be consumed using an Amazon Echo device.

Cody's write-up was fantastic and I was able to get everything up and running in about 20-25minutes with a few minor trial/error. It was great to see how easy it was for a non-developer like Cody to easily consume the new vCenter Server REST APIs which includes basic VM Management as well access to the VMware Management Appliance Interface or VAMI for short. Given Cody already did the hard work to create the initial Alexa integration, I figure it might be cool to extend his work and introduce Alexa to a few more VMware's APIs including the traditional vSphere API (SOAP) and the new vSAN Management API.

UPDATE (06/15/17) - Just added support for PowerCLI, it was a little tricky as Flask app is written in Python and so poor man workaround was to call Powershell/PowerCLI using subprocess.

Since Cody's integration module was written using Python, it was pretty simple to add support for both pyvmomi (vSphere SDK for Python) and vSAN Management SDK. To install pyvmomi, you can simply run

pip3 install pyvmomi

and for installing vSAN Management SDK, have a look at this blog post here.

Here is a quick video that I had recorded which demonstrates the use of both the vSphere API and vSAN Management API using my Amazon Echo.

You can find all my changes in this forked repo lamw/alexavsphereskill and make sure to follow Cody's blog post here for instructions on how to get setup. For those wondering if Cody will be publishing an Alexa Skill for general consumption, I know he is working on some awesome updates to make it even easier to consume. Here is a sneak peak at just some of the recent updates that Cody is working on ...

Stay tuned on this blog and Github repo for future updates!

One thing to note which I was not aware of until Cody mentioned it, is that once your Alexa Skill is built, you can directly access it from your own personal Amazon Echo without needing to publish it. You need to activate the Alexa Skill by saying "Alexa Start [APP-NAME]" where name is the name used in the "Invocation Name" field as shown in the screenshot below when setting up your Alexa Skill. I should also mention that if you decide to change the Alexa Skill name itself, which I had initially done and called it "vGhetto Control", make sure you update the Flask App name in __init__.py to the same name (spaces are converted to underscores) or you will run into issues.

Automating the new native VCSA bootstrap "Easy Install" in vSAN 6.6

by // 10 Comments

In case you missed the previous article, have a read here which goes into greater detail behind the new VCSA bootstrap installer (also known as vSAN Easy Install) which is part of the new vSAN 6.6 release. As I hinted at the end of the previous post, customers not only have a simplified way of bootstrapping the VCSA on vSAN from a UI standpoint but they can also completely automate this leveraging some of the new vSAN Management 6.6 APIs, which are the same APIs that the UI uses.

A new Managed Object called VsanVcsaDeployerSystem is now available when connecting to either a standalone ESXi host as well as a vCenter Server. It contains the following three methods:

Here is the workflow for automating the VCSA bootstrap installer:

Step 1 - Connect directly to the ESXi host which you wish to bootstrap vSAN. You will use the VsanPrepareVsanForVcsa() API which accepts a list of disks for either a Hybrid or All-Flash vSAN datastore.

Step 2 - Deploy the VCSA like you normally would using the CLI Installer. You will specify the ESXi host that you had just prepared in Step 1 which includes the vSAN Datastore that was setup as part of that process.

Step 3 - Once the VCSA has been successfully deployed, you will connect to the vCenter Server and use the VsanPostConfigForVcsa() API which will create a vSphere Datacenter, vSphere Cluster and enable it with vSAN (which can also include Dedupe/Compression if you are using an All-Flash setup) and then automatically add the ESXi host that you had just bootstrapped. If you have provisioned other ESXi hosts that have not been configured with vSAN, you can also include that into the API request. The really nice thing about this "post" API is that rather than having to call into several existing vSphere APIs to setup vCenter Server, you can do all of that just using this single API!

To help demonstrate the use of the these new vSAN Management APIs, I have created a simple Python script which exercises these new APIs called vsan-vcsa-deployer-sample.py The script supports three operations: listdisk, prepare and post.

Here is an example of running the listdisk operation which will list all available disks that are currently not in use and can be used by vSAN:

python vsan-vcsa-deployer-sample.py -s 192.168.1.100 -u root -p VMware1! --operation listdisk

Once you have the disks information, you can then use the prepare operation as shown below to bootstrap your ESXi host:

python vsan-vcsa-deployer-sample.py -s 192.168.1.100 -u root -p VMware1! --operation prepare --cache "SAMSUNG MZVPV128" --capacity "Samsung SSD 850"


At this point, you are now ready to deploy the VCSA using the CLI Installer. Once that has completed, you can complete the process by using the post operation and provide the required parameters to setup vCenter Server including the ESXi host that you had just bootstrapped so it can be added to the vCenter Server inventory as shown below:

python vsan-vcsa-deployer-sample.py -s 192.168.1.200 -u '*protected email*' -p VMware1! --operation post --datacenterName "VSAN-Datacenter" --clusterName "VSAN-Cluster" --esxName 192.168.1.100 --esxUsername root --esxPassword VMware1!


Once the post operation has completed, you will have a fully configured vCenter Server which you can check by logging into the vSphere Web Client. Pretty slick, if you ask me!