WilliamLam.com

MacOS 11 (Big Sur) Beta 1 on ESXi

by // 15 Comments

The first Beta of Apple MacOS 11 (Big Sur) was just released a couple of days ago and I know folks are excited to start kicking the tires. Some folks have noticed when to installing Big Sur running on VMware Fusion, the following error is observed:

BIErrorDomain error 3


From the suggested workarounds, it looks like the MacOS installer was somehow unable to detect that the underlying hardware was Apple which causes this generic error to be thrown. Interestingly, this was the same error I came across when attempting to install Big Sur on ESXi 7.0. Instead of having to lookup your physical Apple hardware IDs and specify several VM Advanced Settings, you can simply add the following setting which will accomplish the same behavior:

smbios.reflectHost = "TRUE"

After the setting has been applied, the error should go away and you should be able to upgrade from an existing MacOS deployment to Big Sur. This issue has already been reported internally at VMware and I have also shared with the teams the quick workaround.

Here is Big Sur on ESXi 7.0 running on an Apple Mac Mini 2018 (requires ESXi 7.0b patch VMware-ESXi-7.0b-16324942)


Here is Big Sur on ESXi 6.7 Update 3 running on an Apple Mac Mini 2018 (requires ESXi 6.7 Patch 02 ESXi670-202004002)

Passthrough of Integrated GPU (iGPU) for standard Intel NUC

by // 35 Comments

Earlier this week I found out that it was possible to passthrough the Integrated GPU (iGPU) for standard Intel NUC which was motivated by a question I had saw on the VMware Subreddit. I have written about iGPU passthrough for Intel NUCs before but only for the higher end models which were the Hades Canyon NUC at the time.

To be honest, I never thought about trying this out with a standard NUC as I figured the iGPU may not be powerful enough or warrant any interests. After sharing the news on Twitter, I came to learn from the community that not only is this desirable for various use cases but some folks have also been doing this for some time now and have shared some the benefits it brings for certain types of workloads.

Below are the instructions I used to enable iGPU passthrough on an Intel NUC 10 (Frost Canyon) with vSphere 7.0. These instructions should also be applicable for other NUC models and earlier versions of vSphere including details around passthrough configuration persistency which I know some folks have ran into which I was able to figure out as part of this experiment.

[Read more...]

Quick Tip - HTTPs now supported with wget on ESXi 7.0

by // 4 Comments

This morning I needed to install the USB Network Native Driver Fling for ESXi and realized that offline bundles can not be installer over a remote URL. I figure I would download it directly to my ESXi host using wget. As soon as I hit the enter key to send the command I quickly remember that this will fail as the version of wget in the ESXi Shell does not support HTTPs. To my surprise, it actually worked! 😍

[root@nuc:~] wget https://download3.vmware.com/software/vmw-tools/USBNND/ESXi700-VMKUSB-NIC-FLING-34491022-component-15873236.zip
Connecting to download3.vmware.com (184.29.106.37:443)
ESXi700-VMKUSB-NIC-F 100% |**************************************************************************************************************************************************************************| 341k 0:00:00 ETA

This looks to be an enhancement in ESXI 7.0 and you no longer will get the "bad address" error when specifying an HTTPs URL as shown in the example below when running against the latest ESXi 6.7 Update 3 release.

[root@esxi67:~] wget https://download3.vmware.com/software/vmw-tools/USBNND/ESXi700-VMKUSB-NIC-FLING-34491022-component-15873236.zip
wget: bad address 'download3.vmware.com'

Thank you to the Engineer who fixed this, this was a very pleasant and welcome surprise that I know will also be helpful to folks who automate using ESXi Scripted Installations.