William Lam

How to Change the IP Address for vCenter Operations 5 vApp

02.04.2012 by William Lam // 11 Comments

There was an interesting question on twitter from Matt Cowger yesterday asking how to modify the IP Address of the Analytics VM in the new vCenter Operations 5 vApp after it has been deployed. The new VC Ops 5 is actually composed of two virtual machines: UI and Analytics VM. As part of the initial deployment, they're is an exchange of information between the two VMs to properly get setup which includes the IP Addresses of each other. Simply modifying the IP Address of either VM will result in VC Ops not functioning correctly.

I personally have not had to re-IP my home deployment of VC Ops, but I did have some experience with CapacityIQ before it was combined into the VC Ops product and there was a nifty CLI tool called ciq-admin that was not very well known. I thought I check to see if the new VC Ops had something similar and to my surprise, an updated version of the tool exists and has been renamed to vcops-admin.

After a few minutes of looking around, it was clear that one could modify the IP Address of the Analytics VM and here are three simple steps.

Disclaimer: This is for educational purposes only, this is not officially supported by VMware. Please ensure you test and backup your system before making any changes in a real production system. Data that was previously collected will still be available after the change of an IP Address.

Modifying IP Address for Analytics VM:

Step 1 - First we need to shutdown VC Ops, you can do this from the administrator page by going to https://[vcops-ip]/admin and stopping the service under the Status tab. In this example, I will be showing you how to so using the CLI on the UI VM (this is primary system you use to access VC Ops)

You will need to sudo to "admin" user to run the command "vcops-admin stop". If you accidentally logged into the analytics VM and try to run the command, you will receive an error as the CLI is only available on the UI VM.

Step 2 - Log into the remote console of the analytics VM, this is required as you will be changing the IP Address and may possible impact network traffic. You will need to edit /etc/sysconfig/network/ifcfg-eth0 using an editor such as "vi" and specify the IP Address you wish to change to. Once you are done, you will need to restart the network interface for the changes to take effect. To so so, run the following command "service network restart".

Step 3 - Go back to the UI VM (you will need to sudo over to "admin" account if you are not already) and you will now need to "repair" the connection between the UI and Analytics VM to ensure they can communicate with each other. To do so, you will run the following command "vcops-admin repair --ipaddress [new-analytics-ip]". If the UI VM is able to successfully connect to the new IP Address of the Analytics VM, it will automatically start up the VC Ops service. Once the service has been started, VC Ops is now running and operational.

Now what if you want to change the UI VM's IP Address? I thought this should be pretty straight forward right? Well, it took me a bit longer than I was expecting but the process is just four easy steps.

Modifying IP Address for UI VM:

Step 1 - Stop VC Ops service, you can do this using the admin portal or via SSH as shown in Step 1 of Analytics VM

Step 2 - Login to the remote console of the UI VM this is required as you will be changing the IP Address and may possible impact network traffic. You will need to edit /etc/sysconfig/network/ifcfg-eth0 using an editor such as "vi" and specify the IP Address you wish to change to. Once you are done, you will need to restart the network interface for the changes to take effect. To so so, run the following command "service network restart".

Step 3 - Login via SSH to UI VM using the new IP Address (you will need to sudo over to "admin" account if you are not already) and you will now need to "repair" the connection between the UI and Analytics VM to ensure they can communicate with each other. To do so, you will run the following command "vcops-admin repair --ipaddress [new-analytics-ip]". If the UI VM is able to successfully connect to the Analytics VM, it will automatically start up the VC Ops service.

Step 4 - The last step is to update the vCenter VC Ops plugin information so when you navigate to the VC Ops extension, it knows the new IP Address. This step can be done by logging into the admin portal and under "Registration" tab, you will need to click on the "update" button for each and every vCenter that is attached to the VC Ops. In this example, I will show how to do so using the "vcops-admin" CLI. You will need to run the following command:

vcops-admin register update --vc-name [vc-name] --vc-server [https://vc-server/sdk] --username [vc-username] --password [vc-password] --force

Note: This process may take a few minutes for each vCenter that you need to update, also if you have a dedicated service account for the collector, you can specify --collection-user and --collection-password agruments.

Though the process of modifying the IP Address is not available through the UI today, it is a feature that I will be requesting as this should be a trivial task for users.

How to Create Manifest File for OVF Signing

01.25.2012 by William Lam // 4 Comments

While browsing the VMTN forums the other day, I just learned that you can sign your own OVF files using VMware's ovftool. To sign your OVF files, you will need the .ovf, .vmdk files and an X.509 certificate. Though not mandatory, you should also have a manifest file that includes a hash of the files to be signed. ovftool will still allow you to sign the OVF files, but a warning will be thrown if the manifest file is not included.

If you export a virtual machine/vApp using the vSphere Client or the ovftool, the manifest file is automatically generated for you and it ends with .mf extension.

If you have some OVF files that you want to sign but do not have the manifest file or somehow lost it, it is actually quite easy to re-create using the openssl utility.

To create the manifest file, run the following command for all files to be signed:

openssl sha1 *.vmdk *.ovf > MyVM.mf

You can use cat utility to view the contents of the manifest file:

To sign your OVF files, run the following command which will include the path to your X.509 certificate and the new signed OVF name:

ovftool --privateKey=ghetto.pem MyVM.ovf MyVM-Signed.ovf

Note: There is no space between --privateKey= and the path to X.509 certifcate, else you may get an odd error message.

If the signing was successful, you should not see any errors:

To view the newly signed OVF files, you can run the following command:

ovftool MyVM-Signed.ovf

You will find that the OVF has been signed under the "Manifest Info" section:

Now when you import the OVF back into your environment using either the vSphere Client or ovftool, you should now see the certificate information:

For more details and examples of using the ovftool, take a look at the user guide here.

Vote For Ghetto

01.24.2012 by William Lam // Leave a Comment

It is that time of the year again, Eric Siebert who runs the popular vSphere-land.com website has just opened up the polls for the Top 25 VMware Virtualization Blogs. This year the voting is not only for the top 25 blogs, but Eric has also introduced categories for best storage, scripting, news information blog, etc. that you can also vote for. I already have a few that I will definitely be voting for such as Steve Jin, Duncan Epping, Frank Denneman and Alan Renouf but also new comers like Chris Colotti.

Here are the top 10 popular posts on virtuallyGhetto for 2011 to help make your decision and vote for virtuallyGhetto!

Vote For Ghetto! Thanks for your support