WilliamLam.com

  • About
    • About
    • Privacy
  • VMware Cloud Foundation
  • VKS
  • Homelab
    • Resources
    • Nested Virtualization
  • VMware Nostalgia
  • Apple

How to Format and Create VMFS5 Volume using the CLI in ESXi 5

07.19.2011 by William Lam // 39 Comments

VMware always recommends formatting and creating a new VMFS volume using the vSphere Client as it automatically aligns your VMFS volume. However, if you do not have access to the vSphere Client or you wanted to format additional VMFS volumes via a kickstart, you can do so using the CLI and the partedUtil under /sbin.

~ # /sbin/partedUtil
Not enough arguments
Usage:
Get Partitions : get
Set Partitions : set ["partNum startSector endSector type attr"]*
Delete Partition : delete Resize Partition : resize
Get Partitions : getptbl
Set Partitions : setptbl

With ESXi 5, an MBR (Master Boot Record) partition table is no longer used and has been replaced with a GPT (GUID Partition Table) partition table. There is also only one block size of 1MB versus the 2,4 and 8 that was available in ESX(i) 4.x

We can view the partitions of a device by using the "getptbl" option and ensure we don't have an existing VMFS volume:

~ # /sbin/partedUtil "getptbl" "/vmfs/devices/disks/mpx.vmhba1:C0:T2:L0"
gpt
652 255 63 10485760

Next we will need to create a partition by using the "setptbl" option:

/sbin/partedUtil "setptbl" "/vmfs/devices/disks/mpx.vmhba1:C0:T2:L0" "gpt" "1 2048 10474379 AA31E02A400F11DB9590000C2911D1B8 0"

The "setptbl" accepts 3 arguments:

  • diskName
  • label
  • partitionNumber startSector endSector type/GUID attribute

The diskName in this example is the full path to the device which is /vmfs/devices/disks/mpx.vmhba1:C0:T2:L0

The label will be gpt

The last argument is actually a string comprised of 5 individual parameters:

  • partitionNumber - Pretty straight forward
  • startSector - This will always be 2048 for 1MB alignment for VMFS5
  • endSector - This will need to be calculated based on size of your device
  • type/GUID - This is the GUID key for a particular partition type, for VMFS it will always be AA31E02A400F11DB9590000C2911D1B8

To view all GUID types, you can use the "showGuids" option:

~ # /sbin/partedUtil showGuids
Partition Type       GUID
vmfs                 AA31E02A400F11DB9590000C2911D1B8
vmkDiagnostic        9D27538040AD11DBBF97000C2911D1B8
VMware Reserved      9198EFFC31C011DB8F78000C2911D1B8
Basic Data           EBD0A0A2B9E5443387C068B6B72699C7
Linux Swap           0657FD6DA4AB43C484E50933C84B4F4F
Linux Lvm            E6D6D379F50744C2A23C238F2A3DF928
Linux Raid           A19D880F05FC4D3BA006743F0F84911E
Efi System           C12A7328F81F11D2BA4B00A0C93EC93B
Microsoft Reserved   E3C9E3160B5C4DB8817DF92DF00215AE
Unused Entry         00000000000000000000000000000000

Once you have the 3 arguments specified, we can now create the partition:

~ # /sbin/partedUtil "setptbl" "/vmfs/devices/disks/mpx.vmhba1:C0:T2:L0" "gpt" "1 2048 10474379 AA31E02A400F11DB9590000C2911D1B8 0"
gpt
0 0 0 0
1 2048 10474379 AA31E02A400F11DB9590000C2911D1B8 0

UPDATE (01/15) - Here is a quick shell snippet that you can use to automatically calculate End Sector as well as creating the VMFS5 volume:

partedUtil mklabel ${DEVICE} msdos
END_SECTOR=$(eval expr $(partedUtil getptbl ${DEVICE} | tail -1 | awk '{print $1 " \\* " $2 " \\* " $3}') - 1)
/sbin/partedUtil "setptbl" "${DEVICE}" "gpt" "1 2048 ${END_SECTOR} AA31E02A400F11DB9590000C2911D1B8 0"
/sbin/vmkfstools -C vmfs5 -b 1m -S $(hostname -s)-local-datastore ${DEVICE}:1

Note: You can also use the above to create a VMFS-based datastore running on a USB device, however that is not officially supported by VMware and performance with USB-based device will vary depending on the hardware and the speed of the USB connection. 

We can verify by running the "getptbl" option on the device that we formatted:

~ # /sbin/partedUtil "getptbl" "/vmfs/devices/disks/mpx.vmhba1:C0:T2:L0"
gpt
652 255 63 10485760
1 2048 10474379 AA31E02A400F11DB9590000C2911D1B8 vmfs 0

Finally we will now create the VMFS volume using our favorite vmkfstools, the syntax is the same as previous release of ESX(i):

~ # /sbin/vmkfstools -C vmfs5 -b 1m -S himalaya-SSD-storage-3 /vmfs/devices/disks/mpx.vmhba1:C0:T2:L0:1
Checking if remote hosts are using this device as a valid file system. This may take a few seconds...
Creating vmfs5 file system on "mpx.vmhba1:C0:T2:L0:1" with blockSize 1048576 and volume label "himalaya-SSD-storage-3".
Successfully created new volume: 4dfdb7b0-8c0dcdb5-e574-0050568f0111

Now you can refresh the vSphere Client or run vim-cmd hostsvc/datastore/refresh to view the new datastore that was created.

Categories // Automation, ESXi Tags // ESXi 5.0, gpt, partedUtil, usb, vmfs, vSphere 5.0

Search

Thank Author

Author

William is Distinguished Platform Engineering Architect in the VMware Cloud Foundation (VCF) Division at Broadcom. His primary focus is helping customers and partners build, run and operate a modern Private Cloud using the VMware Cloud Foundation (VCF) platform.

Connect

  • Bluesky
  • Email
  • GitHub
  • LinkedIn
  • Mastodon
  • Reddit
  • RSS
  • Twitter
  • Vimeo

Recent

  • Programmatically accessing the Broadcom Compatibility Guide (BCG) 05/06/2025
  • Quick Tip - Validating Broadcom Download Token  05/01/2025
  • Supported chipsets for the USB Network Native Driver for ESXi Fling 04/23/2025
  • vCenter Identity Federation with Authelia 04/16/2025
  • vCenter Server Identity Federation with Kanidm 04/10/2025

Advertisment

Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy

Copyright WilliamLam.com © 2025