WilliamLam.com

Automating Workload Management on vSphere with Tanzu

by // 7 Comments

As promised, here is the complimentary solution to my existing Automated vSphere with Tanzu Lab Deployment Script, which will automatically deploy and configure the required infrastructure (vCenter Server Appliance, ESXi, vSAN and HAProxy VMs) so that you can quickly jump to enabling Workload Management on your vSphere Cluster.

FYI: Ben Corrie, one of the Engineers on the vSphere with Tanzu team recently published a vSphere with Tanzu 4-Part Deep Dive video series where he walks you through in deploying everything from scratch along with the concepts that should help you better understand how vSphere with Tanzu works. He is actually doing this in his own personal homelab and thought this might be useful to share with others. Kudos Ben and highly recommend folks check out his video if you new to vSphere with Tanzu and Kubernetes.


Enabling Workload Management is a manual step after the automated deployment script and as you know, I prefer to automate as much as I can. I have updated my existing PowerCLI Workload Management Module to now also support the new vSphere with Tanzu capability using HAProxy for networking instead of NSX-T. The module can be downloaded from PowerShell Gallery by simply running

[Read more...]

Automated vSphere with Tanzu Lab Deployment Script

by // 16 Comments

After sharing a sneak peak of my updated vSphere with Tanzu Automated Lab Deployment script on Twitter, I have been receiving non-stop requests on when the script will be available. It took a bit longer to finish off the documentation, creating the script was actually the easy part 😛

In any case, I am happy to finally share the automated script for deploying the new vSphere with Tanzu "Basic" which is included as part of vSphere 7.0 Update 1 is now available! You can find full details at the following Github repo: https://github.com/lamw/vsphere-with-tanzu-basic-automated-lab-deployment

In addition to the deployment instructions on the Github repo, I have also included a sample walkthrough which includes both deploying the vSphere with Tanzu environment as well as enabling Workload Management on the vSphere Cluster, which is not part of the automated deployment script.

I will also be updating my existing Workload Management PowerCLI Module to incorporate the new requirements for automating the enablement of Workload Management for a vSphere with Tanzu Basic Cluster. Together with this script, you will now have the ability to deploy vSphere with Tanzu end-to-end in under 1hr time!

More details will be shared in a later blog post and I hope folks enjoy the script, it was a ton of work!

How to SSH to Tanzu Kubernetes Grid (TKG) Cluster in vSphere with Tanzu?

by // 6 Comments

For troubleshooting your vSphere with Tanzu environment, you may have a need to SSH to the Control Plane of your Tanzu Kubernetes Grid (TKG) Cluster. This was something I had to do to verify some basic network connectivity. At a high level, we need to login to our Supervisor Cluster and retrieve the SSH secret to our TKG Cluster and since this question recently came up, below are the instructions.


UPDATE (10/10/20) - It looks like it is also possible to retrieve the TKG Cluster credentials without needing SSH directly to the Supervisor Control Plane VM, see Option 1 for the alternate solution.

Option 1:

Step 1 - Login to the Supervisor Control Plane using the following command:

kubectl vsphere login --server=172.17.31.129 -u *protected email* --insecure-skip-tls-verify

Step 2 - Next, we need to retrieve the SSH password secret for our TKG Cluster and perform a base64 decode to retrieve the plain text value. You will need two pieces of information and then substitute that into the command below

  • The name of your vSphere Namespace which was created in your vSphere with Tanzu environment, in my example it is called primp-industries
  • The name of your TKG Cluster, in my example it is called william-tkc-01 and the secret name will be [tkg-cluster-name]-ssh-password as shown in the example below

kubectl -n primp-industries get secrets william-tkc-01-ssh-password -o jsonpath={.data.ssh-passwordkey} | base64 -d

Step 3 - Finally, you can now SSH to TKG Cluster from a system which has network connectivity, this can be from the Supervisor Cluster Control Plane VM or another system. The SSH username for the TKG Cluster is vmware-system-user and use the credentials that was provided from the previous screen.

Option 2:

Step 1 - SSH to the VCSA and then run the following script to retrieve the Supervisor Cluster Control Plane VM credentials:

/usr/lib/vmware-wcp/decryptK8Pwd.py

Step 2 - SSH to the IP Address using root username and the password provided from the previous command

Step 3- Next, we need to retrieve the SSH password secret for our TKG Cluster and perform a base64 decode to retrieve the plain text value. You will need two pieces of information and then substitute that into the command below

  • The name of your vSphere Namespace which was created in your vSphere with Tanzu environment, in my example it is called primp-industries
  • The name of your TKG Cluster, in my example it is called william-tkc-01 and the secret name will be [tkg-cluster-name]-ssh-password as shown in the example below

kubectl -n primp-industries get secrets william-tkc-01-ssh-password -o jsonpath={.data.ssh-passwordkey} | base64 -d

Step 4 - Finally, you can now SSH to TKG Cluster from a system which has network connectivity, this can be from the Supervisor Cluster Control Plane VM or another system. The SSH username for the TKG Cluster is vmware-system-user and use the credentials that was provided from the previous screen.