While working on my Getting started with VMware Pivotal Container Service (PKS) blog series awhile back, one of the things I was also working on was some automation to help build out the required infrastructure NSX-T (Manager, Controller & Edge), Nested ESXi hosts configured with VSAN for the Compute vSphere Cluster and Pivotal Ops Manager. This was not only useful for my own learning purposes, but that I could easily rebuild my lab if I had messed something up and allowed me to focus more on the PKS solution rather than standing up the infrastructure itself.
To be honest, I had about 95% of the script done but I was not able to figure out one of the NSX-T APIs and I got busy and had left the script on the back burner. This past weekend while cleaning out some of my PKS research documents, I came across the script and funny enough, in about 30minutes I was able to solve the problem which I was stuck for weeks prior. I just finished putting the final touches on the script along with adding some documentation. Simliar to my other vGhetto Lab Automation scripts, I have created a Github repo vGhetto Automated PKS Lab Deployment
UPDATE (06/19/18) - I have just updated the script to also include the deployment and configuration of the PKS components (Ops Manager, BOSH Director, Harbor & Stemcell). The script by default will now configure everything end-2-end and you will have a fully functional PKS environment that you can start playing around with. For complete details, please see the Github repo which has the updated requirements and documentation. Below is a screenshot of the PKS deployment and configuration which requires the use of the Ops Manager CLI (OM).
The script will deploy the following components which will be placed inside of a vApp as shown in the screenshot below:
- NSX-T Manager
- NSX-T Controller x 3 (though you technically only need one for lab/poc purposes)
- NSX-T Edge
- Nested ESXi VMs x 3 (VSAN will be configured)
- Ops Manager
The script follows my PKS blog series and automates Part 3 (NSX-T) and the start of Part 4 (Ops Manager deploy), please refer to these individual blog posts for more information. The goal of the script is to enable folks to jump right into the PKS configuration workflows and not have to worry about setting up the actual infrastructure that is needed for PKS. Once the script has finished, you can jump right into Ops Manager and start your PKS journey.
Here is a sample execution of the script which took ~29 minutes to complete.
The full requirements for using the script be found on the Github repo and below are the software versions that I had used to deploy and configure PKS:
- Pivotal Ops Manager for vSphere - 2.1-build.318
- VMware Harbor Container Registry 1.4.2
- Pivotal Container Service 1.0.4
- Stemcell 3668.42
John Tse says
Great write-up. Thanks for sharing
Dave Parsons says
I would love to try this for learning purposes but cannot get access to NSX to try out. Is there a way to use this as an individual?
Johan says
William you're a rockstar, thank you for the awesome work. How simple is it to modify the logic in the script to support a dedicated 4 node vSAN cluster as target for NSX-T and PKS instead op spinning up a nested vSAN cluster?