WilliamLam.com

Unattended Deployment of vCloud Connector Server/Node Virtual Appliance

by // 2 Comments

VMware just released vCloud Connector 1.5 Server and Node which is distributed as a virtual appliance. Just like in previous post Unattended Deployment of vCenter Orchestrator Virtual Appliance here is how you can automate the deployment of vCloud Connector Server and vCloud Connector Node.

Here are the four ovf properties that are used to configure the network for vCloud Connector 1.5

  • vami.gateway.VMware_vCloud_Connector_Server
  • vami.DNS.VMware_vCloud_Connector_Server
  • vami.ip0.VMware_vCloud_Connector_Server
  • vami.netmask0.VMware_vCloud_Connector_Server

Here are the four ovf properties that are used to configure the network for vCloud Connector 1.5

  • vami.gateway.VMware_vCloud_Connector_Node
  • vami.DNS.VMware_vCloud_Connector_Node
  • vami.ip0.VMware_vCloud_Connector_Node
  • vami.netmask0.VMware_vCloud_Connector_Node

To see these properties before deploying, you can query using the ovftool which can help you identify the name of the ovf variables using the following command:

ovftool --hideEula vCCServer-1.5.0.0-515166_OVF10.ovf

Here is an example of the ovftool command to deploy vCC Server:

ovftool --acceptAllEulas --skipManifestCheck '--net:Network 1=VM_Network' --datastore=vesxi50-1-local-storage-1 --diskMode=thin --name=vcc-server --prop:vami.DNS.VMware_vCloud_Connector_Server=172.30.0.100 --prop:vami.gateway.VMware_vCloud_Connector_Server=172.30.0.1 --prop:vami.ip0.VMware_vCloud_Connector_Server=172.30.0.143 --prop:vami.netmask0.VMware_vCloud_Connector_Server=255.255.255.0 vCCServer-1.5.0.0-515166_OVF10.ovf 'vi://root:*protected email*/?dns=vesxi50-1.primp-industries.com'

Here is an example of the ovftool command to deploy vCC Node:

ovftool --acceptAllEulas --skipManifestCheck '--net:Network 1=VM_Network' --datastore=vesxi50-1-local-storage-1 --diskMode=thin --name=vcc-node --prop:vami.DNS.VMware_vCloud_Connector_Node=172.30.0.100 --prop:vami.gateway.VMware_vCloud_Connector_Node=172.30.0.1 --prop:vami.ip0.VMware_vCloud_Connector_Node=172.30.0.144 --prop:vami.netmask0.VMware_vCloud_Connector_Node=255.255.255.0 vCCNode-1.5.0.0-515165_OVF10.ovf 'vi://root:*protected email*/?dns=vesxi50-1.primp-industries.com'

Of course, I wrote a simple shell script deployvCC.sh to help with the deployment. The script assumes you have ovftool installed and the OVF files located in the same directory as the script. You will need to edit the following variables if you wish to deploy vCC Server and/or Node:

Note: There are many ways of using the ovftool to deploy an OVF. In this simple example, it requires you to specify an ESX(i) host, but you can modify the locator to deploy to a VM folder or datacenter path. For more examples and options, please take a look at the ovftool documentation.

Here is an example of the script in action:

Once the vCC virtual appliance has been deployed, you can also have it automatically power on by specifying the following parameter --powerOn.

If everything was successful, you should now be able to point your browser to the hostname of your vCC Server/Node and you should taken to the vCC splash screen.

Happy vConnecting 🙂

Unattended Deployment of vCloud Director Virtual Appliance

by // 1 Comment

VMware just released vCloud Director 1.5 as a virtual appliance for the first time. This virtual appliance is not meant to be used in a production environment, but to help users easily deploy and evaluate vCloud Director. There is also an updated vCloud Director Evaluators Guide that goes along with the new vCD appliance that was released today which you should also check out.

Just like in previous post on unattended deployments of vCenter Orchestrator and vCloud Connector. Here is how you can automate the deployment of vCloud Director.

Here are the four ovf properties that are used to configure the network for vCloud Director 1.5

  • vami.gateway.VMware_vCloud_Director
  • vami.DNS.VMware_vCloud_Director
  • vami.ip0.VMware_vCloud_Director
  • vami.netmask0.VMware_vCloud_Director
  • vami.ip1.VMware_vCloud_Director
  • vami.netmask1.VMware_vCloud_Director

Note: There are two network interfaces for vCloud Director, one for HTTP and one for CONSOLE access.

To see these properties before deploying, you can query using the ovftool which can help you identify the name of the ovf variables using the following command:

ovftool --hideEula vCloud_Director_VA_CentoOS5-1.5.0.0-525550_OVF10.ova

Here is an example of the ovftool command to deploy vCD Server:

ovftool --acceptAllEulas --skipManifestCheck '--net:Network 1=VM_Network' '--net:Network 2=VM_Network' --datastore=vesxi50-2-local-storage-1 --diskMode=thin --name=vcd --prop:vami.DNS.VMware_vCloud_Director=172.30.0.100 --prop:vami.gateway.VMware_vCloud_Director=172.30.0.1 --prop:vami.ip0.VMware_vCloud_Director=172.30.0.148 --prop:vami.netmask0.VMware_vCloud_Director=255.255.255.0 --prop:vami.ip1.VMware_vCloud_Director=172.30.0.149 --prop:vami.netmask1.VMware_vCloud_Director=255.255.255.0 vCloud_Director_VA_CentoOS5-1.5.0.0-525550_OVF10.ova 'vi://root:*protected email*/?dns=vesxi50-2.primp-industries.com'

Of course, I wrote a simple shell script deployvCD.sh to help with the deployment. The script assumes you have ovftool installed and the OVF files located in the same directory as the script. You will need to edit the following variables if you wish to deploy vCD Server:

Note: There are many ways of using the ovftool to deploy an OVF. In this simple example, it requires you to specify an ESX(i) host, but you can modify the locator to deploy to a VM folder or datacenter path. For more examples and options, please take a look at the ovftool documentation.

Here is an example of the script in action:

Once the vCD virtual appliance has been deployed, you can also have it automatically power on by specifying the following parameter --powerOn.

If everything was successful, you should now be able to point your browser to the hostname of your vCD Server and you should taken to the vCD splash screen.

Happy vClouding 🙂

Unattended Deployment of vCenter Orchestrator Virtual Appliance

by // 9 Comments

This weekend I spent sometime with the new vCenter Orchestrator virtual appliance in the ghetto lab. Instead of using the vSphere Client to deploy the OVF, I wanted to see if I could deploy it 100% from the command line using the ovftool. One of the cool things about OVF from an author perspective, is the ability to create custom variables which can then be specified during deployment to include guest customization, network or application configurations.

In the case of the new vCO virtual appliance, VMware provides the following four variables to customize the network configuration:

  • vami.DNS.vCO_Appliance
  • vami.gateway.vCO_Appliance
  • vami.ip0.vCO_Appliance
  • vami.netmask0.vCO_Appliance

Using the ovftool, you can specify the following variables to not only deploy the vCO OVF through the commandline but also configure the guestOS network without having to manually go through vSphere Client or remote console.

Here is an example of the ovftool command to deploy vCO:

/usr/bin/ovftool --acceptAllEulas --skipManifestCheck '--net:Network 1=VM_Network' --datastore=vesxi50-1-local-storage-1 --diskMode=thin --name=vco --prop:vami.DNS.vCO_Appliance=172.30.0.100 --prop:vami.gateway.vCO_Appliance=172.30.0.1 --prop:vami.ip0.vCO_Appliance=172.30.0.142 --prop:vami.netmask0.vCO_Appliance=255.255.255.0 vCO_VA-4.2.0.1-507352_OVF10.ovf 'vi://root:*protected email*/?dns=vesxi50-1.primp-industries.com'
Opening OVF source: vCO_VA-4.2.0.1-507352_OVF10.ovf

If the command looks a little daunting, it is really not and to make the deployment of vCO even simpler, I decided to write a small shell script called deployvCO.sh that users can use.

The script assumes you have ovftool installed and downloaded both the vCO OVF and system disk in the same working directory. You will need to edit a few variables within the script which specifies the vCenter and ESXi host to deploy to and resources for vCO appliance such as network portgroup, datastore, etc.

Note: There are many ways of using the ovftool to deploy an OVF. In this simple example, it requires you to specify an ESX(i) host, but you can modify the locator to deploy to a VM folder or datacenter path. For more examples and options, please take a look at the ovftool documentation.

Here is an example of the script in action:

Once the vCO virtual appliance has been deployed, you can also have it automatically power on by specifying the following parameter --powerOn.

If everything was successful, you should now be able to point your browser to the hostname of your vCO server and you should taken to the vCO splash screen.

Now you can easily deploy vCO without the need of the vSphere Client! Happy workflowing 🙂