WilliamLam.com

How to quickly setup and test VMware VSAN (Virtual SAN) using Nested ESXi

by // 48 Comments

Last week at VMworld 2013, VMware announced the release of vSphere 5.5 which includes a variety of exciting new features.  One of the most anticipated feature introduced in this release is VMware Virtual SAN (VSAN) which will be available initially as a public beta. One question that I heard repeatedly throughout the VMworld conference was whether it would be possible to test VSAN in a nested ESXi environment? The answer is absolutely! This is a great way to learn about VSAN and how works from a functional perspective before procuring the necessary hardware.

Disclaimer: Running VSAN in a nested ESXi environment is not officially supported nor is it a replacement for actual testing on actual physical hardware.

Before getting started, I would highly recommend you check out the following resources from my good friend Cormac Hogan which includes a detailed VSAN walk through as well what looks to be an awesome series of articles on how VSAN works:

Requirements:

  • Environment running either vSphere 5.1 or 5.5 and access to the vSphere Web Client.

Configuration:

Nested ESXi VM configured with the minimal resources:

  • 2 vCPU
  • 5GB Memory (ESXi 5.5 now requires a minimum of 4GB vs 2GB as with previous releases but VSAN requires minimum of 5 with recommended 6)
  • 2GB Disk for ESXi 5.5 installation
  • 4GB Disk for an "Emulated" SSD
  • 8GB Disk for HDD

Easy Method:

Instead of having you go through the process of building a Nested ESXi VM with all the prerequisites that includes steps from here and here. I have pre-built a VSAN Nested ESXi VM template (217Kb) that you can just download and import into your environment and being the installation process.

Download either:

and connect to your vCenter Server 5.1 or 5.5 using the vSphere Web Client and import the OVF into your environment (do not use the vSphere C# Client as the import does not persist VHV configuration). Once you have imported the VM, you can then mount the ESXi 5.5 ISO and begin the installation. All three VMDKs have been thin provisioned and you can change the capacity during deployment.

Slightly Harder Method:

If you wish to build the Nested ESXi VM yourself, then you can follow these instructions:

Step 1 - Create a new VM and when you get to the compatibility screen, select either "ESXi 5.1 or greater" or "ESXi 5.5 or greater" depending on the version of vSphere you are running

Step 2 - For the GuestOS select "Other" and "Other (64-bit)"

Step 3 - We will need to customize the following virtual hardware configuration:

  • Change vCPU to 2
  • Click on CPU drop down and enable "Expose hardware assisted virtualization to the guest OS"
  • Change Memory to 4GB
  • Change the initial VMDK to 2GB or whatever value you wish to use for ESXi installation
  • Add second VMDK with 4GB or whatever value you wish to use for "emulated" SSD
  • Add third VMDK with 8GB of whatever value you wish to use for the HDD
  • Click on the VM Options tab at the top and select the "Advanced" drop down box. We will need to add the following entry scsi0:1.virtualSSD = 1 For more details please refer to this article

Step 4 - Click okay to provision the VM and once it has been deployed you will need to re-configure the guestOS to "VMware ESXi 5.x" using the vSphere C# Client for vSphere 5.1 or vSphere Web Client for vSphere 5.5. At this point, you will have the same VM image as in the Easy Method and you are now ready to install ESXi 5.5

When you install ESXi 5.5, you should see the following three disks as shown in the screenshot below, ensure you install ESXi on the 2GB disk:

Prior to enabling VSAN on the particular vSphere Cluster, make sure you enable the new VSAN traffic type on one of your VMkernel interfaces for each of your ESXi hosts, this is required for VSAN communication.

If all the prerequisites have been met, you can now easily enable VSAN by simply checking the VSAN box when editing the vSphere Cluster. In just a few minutes you should see diskgroups automatically created (assuming you selected Automatic mode) consuming both the emulated SSD and HDD and the creation of the vsanDatastore which will be available on all ESXi hosts within that vSphere Cluster.

You can also use the same method for emulating an SSD running in a Nested ESXi to functional test the new VMware Flash Read Cache (vFRC) feature.

Quick Tip - Marking an HDD as SSD or SSD as HDD in ESXi

by // 9 Comments

This was a neat little trick that I picked up in one of our internal storage email distribution groups which I thought was quite interesting. Some of you may recall an article I wrote a few years back on how to trick ESXi 5 in seeing an SSD device which relied on adding an SATP rule for a particular storage device. The actual use case for this feature was that not all real SSD devices would automatically be detected by ESXi and this allowed a user to manually mark it as an SSD.

The other "non-official" use case for this feature allows a user to basically "simulate" an SSD by marking a regular HDD as an SSD and I this actually helped me test the new Host Cache (Swap-to-SSD) feature which was part of the vSphere 5 release. Recently there was a customer inquiry asking for the complete reverse, in which you could mark an SSD as an HDD. I am not sure what the use case was behind this request but I did learn it was actually possible using a similar method of adding a SATP rule to a device.

Note: If you are running Nested ESXi, a much simpler solution for simulating an SSD is to use the following trick noted here.

Before you begin, you will need to identify the storage device in which you wish to mark as an SSD or HDD. Use the following ESXCLI command to do so:

esxcli storage core device list

In the screenshot above, we can see for our device mpx.vmhba1.C0:T2:L0 shows "Is SSD" parameter as false. After running two commands below, we should then see that property change to true.

Marking HDD as SSD:

esxcli storage nmp satp rule add -s VMW_SATP_LOCAL -d mpx.vmhba1:C0:T2:L0 -o enable_ssd
esxcli storage core claiming reclaim -d mpx.vmhba1:C0:T2:L0

 

Marking SSD as HDD:

esxcli storage nmp satp rule add -s VMW_SATP_LOCAL -d mpx.vmhba1:C0:T1:L0 -o disable_ssd
esxcli storage core claiming reclaim -d mpx.vmhba1:C0:T1:L0

To perform the opposite, you simply just need to add the disable_ssd option. If you receive an error regarding a duplicate rule, you will need to first remove the SATP rule and then re-create with the appropriate option.

Another useful tidbit is that if you are running Nested Virtualization and the virtual disk of that VM is stored on an actual SSD, that virtual disk will automatically show up within the guestOS as an SSD so no additional changes are required.