WilliamLam.com

How to prompt for user input during an interactive or scripted install of ESXi?

by // 24 Comments

A question that continues to pop up from time to time is whether it is possible to prompt for user input during an interactive or scripted installation of ESXi? This is actually something I have written about before using PXE boot options as a workaround to provide for a semi-interactive automated installation of ESXi. The most recent request for this was not actually from a customer but rather someone internally working at VMware. The individual noted that he had already read my blog and a few other references but was still hopeful for a solution. I remember when I had looked into this problem several years back, I was not able to find anything and the inquiries to VMware (which I was still a customer at the time) came up empty.

UPDATE (01/10/19) - For ESXi 6.5 or greater, please take a look at this blog post for an updated solution

After replying back to the individual with the information that I had, it actually got me thinking which is usually not good 😉 Having just recently finished building a new Kickstart environment to test UEFI PXE boot for ESXi 6.0, I figure I might as well take another look at this topic again. I wanted to see if there was something that could be done with one of the /dev/ttyl (teletype) interfaces while the ESXi Installation was running. I did a couple of Google searches and to my surprise, there was someone on the VMTN Community forum who had already solved this problem and posted a solution almost 1 year before my article, not sure how I could have missed that?!

[Read more...]

Quick Tip - Changing default port for HTTP Reverse Proxy on both vCenter Server & ESXi

by // 11 Comments

If you decide to use a custom port for the HTTP Reverse Proxy (rhttpproxy) on vCenter Server which uses port 80 (HTTP) and 443 (HTTPS) by default, you should also apply the same change on all ESXi hosts being managed by that vCenter Server for proper functionality. The configuration files for the rhttpproxy has since changed from the early days of vSphere 5.x and in vSphere 6.x, there are now different.

UPDATE (04/27/18) - With release of vSphere 6.7, VMware now officially supports customizing the Reverse HTTP(s) Ports on the VCSA. Below is a screenshot using the VCSA Installer UI and this can also be customized in the JSON configuration file using the VCSA CLI Installer for automation purposes.

Below are the instructions for modifying the default ports for rhttproxy service for both Windows vCenter Server, vCenter Server Appliance (VCSA) and ESXi host.

Note: If you change the default ports of your vCenter Server, you will need to ensure that all VMware/3rd Party products that communicate with vCenter Server are also modified.

vCenter Server for Windows

On Windows, you will need to modify C:\ProgramData\VMware\vCenterServer\cfg\vmware-rhttpproxy\config.xml and look for the following lines to change either the HTTP and/or HTTPs ports:

<httpPort>80</httpPort>
<httpsPort>443</httpsPort>

Once you have saved the changes, you will need to restart the VMware HTTP Reverse Proxy service using Windows Services Manager.

vCenter Server Appliance (VCSA)

On the VCSA, you will need to modify /etc/vmware-rhttpproxy/config.xml and look for the following lines to change either the HTTP and/or HTTPs ports:

<httpPort>80</httpPort>
<httpsPort>443</httpsPort>

Once you have saved the changes, you will need to restart the rhttpproxy service by running the following command:

/etc/init.d/rhttpproxy restart

ESXi

Disclaimer: VMware does not officially support modifying the default HTTP/HTTPS ports on an ESXi host.

Pre-ESXi 8.0 - Use the following instructions:

On ESXi, you will need to modify /etc/vmware/rhttpproxy/config.xml and look for the following lines to change either the HTTP and/or HTTPs ports:

<httpPort>80</httpPort>
<httpsPort>443</httpsPort>

Once you have saved the changes, you will need to restart the rhttpproxy service by running the following command:

/etc/init.d/rhttpproxy restart

Hope to see you at the Nordic VMUG UserCon in Dec!

by // Leave a Comment

In case you missed it, a couple of weeks back, Liselotte Foverskov one of the leaders for the Nordic VMUG had announced some of the speakers for the upcoming Nordic VMUG UserCon taking place on Dec 1st at the Scandic Hotel in Copenhagen.

I was very fortunate to have been invited out to speak at the event. As you can see from the tweet above, I will also be joined by several of my colleagues from VMware like Paul Strong, Duncan Epping, Cormac Hogan, Paudie O'Riordan and Joerg Lew who will be covering a variety of topics, so there should be something for everyone. This will be my first time visiting Denmark and I am looking forward to meeting everyone and I hope that you can make it out. I also hear Liselotte has an amazing keynote speaker lined up that you will not want to miss! For more details about the event, be sure to visit Nordic VMUG site here.

Below is the topic that I will be presenting on but feel free to find me at the event if you are interested in talking about other topics that you may have on your mind.

Session Title: 

Harnessing the power of the vSphere API for the everyday Admin 

Session Abstract: 

In this session, you will get a brief introduction to the vSphere API and learn how to use and navigate it without needing to become a developer. Building on this foundation, we will then explore some of the different methods and tools that are available to a variety of audiences (vSphere Administrators, Developers, etc) when Automating against the vSphere API. Finally, we will take a look at some practical examples that demonstrates the vSphere API in action which you can then take back with you when you leave the session.