WilliamLam.com

Search Results for: tanzu

Automating HAProxy VM deployment with 3-NIC configuration using PowerCLI

by // 2 Comments

When deploying the HAProxy VM as part of vSphere with Tanzu, customers have the option of deploying the HAProxy VM using either a 2-NIC or 3-NIC configuration. The default OVF Deployment Option is the 2-NIC design called "Default" and the 3-NIC design is called "Frontend".

From an Automation point of view, you can use either OVFTool or PowerCLI to automate the deployment. For a 2-NIC example, you can refer to my Automated vSphere with Tanzu Lab Deployment Script. However, for the 3-NIC example, a few folks were running into some issues when using PowerCLI for the automation.

The main issue is that because the default OVF Deployment Option is the 2-NIC design (Default), the two additional OVF properties frontend_ip and frontend_gateway is basically hidden when processing the OVF properties when PowerCLI.

Note: You can view these optional properties by running the following OVFTool command: ovftool --X:enableHiddenProperties vmware-haproxy-v0.1.8.ova


Even if you specified the "Frontend" OVF Deployment Option, PowerCLI does not seem to have the logic to retrieve the other optional parameters and hence can not be set as part of the initial deployment.

[Read more...]

Kubernetes on ESXi-Arm using k3s

by // 11 Comments

The tiny form factor of a Raspberry Pi (rPI) is a fantastic hardware platform to start playing with the ESXi-Arm Fling. You can already do a bunch of fun VMware things like running a lightweight vSAN Witness Node to setting up basic automation environment for PowerCLI, Terraform and Packer to running rPI OS as VM, enabling some neat use cases like consolidating your physical rPI assets which might be running RetroPi and Pi-Hole which many home labbers are doing.

In addition to VMware solutions, its is also a great platform to learn and tinker with new technologies like Kubernetes (K8s) which I am sure many of you have been hearing about 🙂 Although our vSphere with Tanzu and Tanzu Kubernetes Grid (TKG) does not currently work with the ESXi-Arm Fling, I have actually been meaning to try out a super lightweight K8s distribution designed for IoT/Edge called k3s (pronounced k-3-s) which also recently joined Cloud Native Computing Foundation (CNCF) Sandbox level.

k3s is supported on rPI and you normally would have multiple rPI devices to represent the number of nodes, for example if you want a basic 3-Node cluster, you would need three physical rPI devices. With ESXi-Arm, you can now create these nodes as VM, using just a single rPI. This opens up the door for all sorts of explorations, you can create HA cluster or try out more advanced features which might be more difficult if you needed several physical devices. If you mess up, you can simply re-deploy the VM without much pain or simply clone the VM.

In my setup, I am using 3 x Photon OS VMs. One for the primary node and two for k3s worker nodes. You can certainly install k3s on any other Arm-based OS including rPI OS (which can now run as a VM as mentioned earlier).


[Read more...]

Using the new installation method for deploying OpenShift 4.5 on VMware Cloud on AWS

by // 1 Comment

I recently saw a tweet from Jason Shiplett who works over on the VMware Validated Design (VVD) team (also my former team before joining VMware Cloud) who shared a new validated design for running Redhat OpenShift 4.3 on VMware Cloud Foundation. Funny enough, a couple of days ago I was just researching into deploying OpenShift running on VMware Cloud on AWS from a customer inquiry.

Timing could not have been better as RedHat just announced their OpenShift 4.5 release a few days ago as and one of the major updates is support for vSphere using their full stack automation also known as te Installer Provisioned Infrastructure (IPI) option. Previous to this, customers who wanted to deploy OpenShift on vSphere had to use the User Provisioned Infrastructure (UPI) method, which the VVD design also uses, which is much lengthier and complex when compared to the native IPI method.

For someone who has never worked with OpenShift before, this was great news and I get to try out this new deployment method on an VMware Cloud on AWS infrastructure 🙂

Pre-Requisites:

Step 1 - You will need a Linux system to perform the installation and it should have access to the vCenter Server running in VMware Cloud on AWS (VMC). In my example, I am using an Ubuntu Server 20.04 VM which is also running in the SDDC and has outbound internet connectivity.

Step 2 - Login to VMware Cloud on AWS console and create a new NSX-T network segment that is DHCP enabled. In my example, I named it openshift-network with a 192.168.3.0/24 configuration.


Step 3 - Navigate to Inventory->Groups and create the following groups and replace the CIDR networks with that of your SDDC:

Group Name IP Address Members
Compute OpenShift Network 192.168.3.0/24
Compute SDDC Management Network 10.2.0.0/16
Management OpenShift Network 192.168.3.0/24

[Read more...]