ESXi 6.5 – Page 6

Custom script bundle is now possible with Auto Deploy in vSphere 6.5

11.23.2016 by William Lam // 10 Comments

It has been some time since I had looked at the Auto Deploy and Host Profile feature in vSphere. As a former customer, I still remember one of the challenges I had in evaluating Auto Deploy and specifically Host Profiles was the fact that it did not cover all the possible ESXi configurations. This made it very difficult to operationalize as you still needed to handle post-configurations through other mechanisms. Trying to keep both solutions did not make sense for me and I ended up opting for the traditional scripted installation method via Kickstart which I had hooks into automate the full ESXi configuration.

In vSphere 6.5, there was a huge effort to significantly improve both Auto Deploy and Host Profile to what customers had expected of this feature, especially around bringing parity between the configurations that could be done using the vSphere Clients and/or vSphere APIs into Host Profiles. In addition, there was also several UI enhancements that now makes it possible to use both Auto Deploy and Image Builder directly from the vSphere Web Client which was never possible before. For more details, be sure to check out the What's New vSphere 6.5 white paper here.

One new feature that I think is worth calling out is the new Script Bundle capability in Auto Deploy. Previously, if a particular configuration was not available via Host Profiles, there was nothing you could really do and you had to write your own custom post-deployment script to apply to the ESXi host. As I mentioned earlier, in vSphere 6.5, we have closed the gap on the ESXi configurations that were not possible using Host Profile and will ensure that will be in sync going forward. Having said that, there are still certain configurations that are not possible today such as creating a custom ESXi firewall rule for example. For these cases, you either had to either hack it up using a method like this or to create a custom ESXi VIB which would then force customers to lower their ESXi's software acceptance level which was not ideal nor acceptable, especially for customers that are security conscious.

[Read more...]

Super easy way of getting ESXi installation date in vSphere 6.5

10.30.2016 by William Lam // 2 Comments

Sometimes it is the small updates which improves an existing feature or enhances the current user experience that I most appreciate with a new vSphere release. One area that I recently came across while working with vSphere 6.5 is just how easy it is now to retrieve the ESXi installation date which can be useful for troubleshooting or auditing purposes. This previously required you to decode the ESXi UUID which was needed to construct the originally installation date as outlined in this VMware KB 2144905 article.

With ESXi 6.5, you can now quickly retrieve the ESXi installation date simply by using this new ESXCLI command:

esxcli system stats installtime get

Note: ESXCLI can be executed either locally within the ESXi Shell or remotely using vCLI or PowerCLI.

In case that was not enough, the Engineer who added this capability was also kind enough to add a native vSphere API to also retrieve the ESXi installation date from a programmatic approach. Under the existing ImageHostConfigManager there is now a new vSphere 6.5 API called installDate() which returns the installation date in UTC format.

To demonstrate this new vSphere API, I have created a small PowerCLI function called Get-ESXInstallDate which can be downloaded from here.

Here is an example of retrieving the installation date for a specific ESXi host:

How to Create and Modify vgz (vmtar) Files on ESXi 3.x/4.x

08.09.2011 by William Lam // 6 Comments

There were several questions today on the VMTN community forums with regards to manipulating .vgz files in ESXi, also known as vmtar files. Due to the sparse amount of information on the web, I wanted to document some of the common operations that can be performed on the vmtar files. I will not be going over the use cases for manipulating or creating custom vmtar files, but here is one use case.

UPDATE (10/16/18) - For ESXi 6.5+, please use the following commands and the example below is using the s.v00 file:

Decompress file:

gunzip < s.v00 > s.v00.xz
xz --single-stream --decompress < s.v00.xz > s.v00.vtar
vmtar -v -x s.v00.vtar -o s.v00.tar
tar -xvf s.v00.tar

Compress file:

tar -cvf s.v00-new.tar bin/ etc/ lib/ lib64/ opt/ usr/ var/
vmtar -v -c s.v00.tar -o s.v00.vtar
xz --single-stream --compress < s.v00.vtar > s.v00.xz
xz --single-stream --compress < s.v00.vtar > s.v00

You can find some of these vmtar files with .vgz extension in the ESXi installation iso, here are a few highlighted in red:

To operate on existing vmtar files, you will need access to an ESXi host via ESXi Shell and using the /sbin/vmtar utility.

Usage: vmtar {[-x vtar/vgz-file] [-c tar/tgz-file] [-v] -o destination} | -t < vtar/vgz-file

In this example, we will copy the install.vgz to an ESXi host to perform some operations.

To list the contents of a vmtar file, you will need to use the -t option:

To extract the contents of vmtar file, you will need to use the -x and -o option:

vmtar -x install.vgz -o install.tar

Note: The output will be a standard tar file which will then need to be extracted before getting to the actual contents

To extract the tar file, we will be using the tar utility:

Let's say we made a change to one of the files and now we would like to re-create the vmtar file, we will first need to tar up the contents by using the tar utility again:

To verify the contents were all tarred up, we can view the contents by using the following command:

tar -tf install.tar

Now we will create the vmtar file using the vmtar utility:

vmtar -c install.tar -o install.vgz

We can confirm the contents by using vmtar -t option once again:

vmtar -t < install.vgz

If you decide to create your own custom vmtar files and want to verify the file layout, you can use vmkramdisk to assist you. Using vdf command, make note of the number of tardisks that have been mounted up.

Also make note of the filesystem layout by performing an "ls" on / (slash):

Now let's say you wanted to create a directory called virtuallyGhetto with a file in that directory called foobar and you wanted it to be mounted up under /

Here are the steps to perform the above:

Do you notice anything different? How about performing an "ls" on / (slash) again?

To umount the vmtar disk, you would use the following command:

vmkramdisk -u virtuallyGhetto.vgz