WilliamLam.com

Building your own Virtual Appliances using OVF properties Part 2

by // 9 Comments

In the previous article, we reviewed the concepts and basic approach to building your own VMware Virtual Appliance (OVF/OVA). In Part 2, we are now going to take a look at a reference implementation for building a Linux VA using VMware PhotonOS. Although I am using PhotonOS as the guest, you can apply these same techniques to any other Linux distribution of your choice.

Step 1 - Create a new VM in vCenter Server and then install PhotonOS using the ISO format. Once you have completed the OS installation, you may want to apply any patches or packages that you want included as part of your VA. Once that is done, go ahead and shut down the VM.

Step 2 - Select the VM in the vSphere Inventory and then click on Configure->vApp and then check the Enable vApp Options. Once enabled, select OVF environment for the IP allocation scheme. In the OVF Details tab, select VMware Tools for the OVF environment transport. (Optionally) You can specify some additional metadata including appliance name and URLs to help others who maybe consuming your VA once it has been exported to an OVF/OVA.

Step 3 - Next, add the following 6 OVF properties which will be used as input to configure networking within PhotonOS. Click Add and provide a Label, Key and optional Category.

Label Key Category
Hostname guestinfo.hostname Networking
IP Address guestinfo.ipaddress Networking
Netmask guestinfo.netmask Networking
Gateway guestinfo.gateway Networking
DNS Server guestinfo.dns Networking
DNS Domain guestinfo.domain Networking


Step 4 - Power back on the VM and once it is available on the network (assuming DHCP), download and copy the sample first boot script rc.local to /etc/rc.d/rc.local. This script is where all the magic happens and will process the OVF property input and then configure the network settings. Right now it assumes these fields are optional, meaning if they left blank, it will default the system to DHCP. If you provide all input properties, then it will go ahead and configure a static network address.

[Read more...]

Building your own Virtual Appliances using OVF properties Part 1

by // 5 Comments

This has been a topic I have been wanting to write about for quite some time, especially as I get asked about this on fairly regular basis from both partners and customers. I normally point folks over to our official Virtual Appliance (VA) authoring tool, VMware Studio which includes a number of development resources to help get started. Studio is used by many of our partners when creating their VA offerings, although it may not be the easiest thing to get started with, it does provide a complete end-to-end solution.

Most recently, I found myself building out a couple of VAs for my own day to day use, including a custom PhotonOS OVA that allows me to configure a static network address during deployment through the use of custom OVF properties. The official PhotonOS OVA that VMware ships does not provide this option and automatically defaults to DHCP. If you want to setup a static IP Address, you would need to first deploy the VM and then login to the console or SSH (if you have DHCP enabled) and then manually update the networking settings.


For my use case, Studio was going to be overkill and not to mention it may not even support PhotonOS or other modern OSes in general. However, everything that is needed to build your own VA is actually available right in vCenter Server. This was the perfect opportunity and excuse for me to finally document *my* process, in case it can help others wanting to do the same, especially for a home lab setup. In Part 1, I will take you through the two important concepts of building your own VA and then in Part 2 and Part 3, we will take a look at building both a Linux and Windows VA. I will also publish a reference Linux and Windows implementation so that you can use that as a basis to build your own VA, which is not limited to just Linux or Windows, it can be ANY GuestOS that vSphere supports.

[Read more...]

VCSA 6.5 CLI Installer now supports new ovftool argument pass-through feature

by // 2 Comments

I had recently discovered a really cool new feature that has been added into the vCenter Server Appliance (VCSA) 6.5 CLI Installer while helping out a fellow colleague. For those of you who have not worked with the VCSA before, you can deploy it using one of two methods: 1) Guided UI Installer 2) Scripted CLI installer. The latter approach is great for Automation purposes as well as being able to quickly spin up a new VCSA as the UI wizard can get tedious once you have done it a few times. The VCSA CLI Installer reads in a JSON configuration file which defines what you will be deploying whether that is an Embedded, PSC or VC node and its respective configuration (networking, password, etc).

In VCSA 6.5, the CLI Installer introduces a new option in the JSON schema called ovftool.arguments. Here is the description of what this new option provides:

Use this subsection to add arbitrary arguments to the OVF Tool
command that the script generates. You do not need to fill it out in
most circumstances.

First of all, I just want to mention that this option should not be required for general deployments but it may come in handy for more advanced use cases. Behind the scenes, the CLI Installer takes the human readable JSON and translates that to a set of OVF properties that are then sent down to ovftool for deployment. Not every single option is implemented in the JSON and for good reason as those level of details should be abstracted away from the end users. However, there may be cases where you may need to invoke a specific configuration or trigger a specific ovftool option and this would allow you to provide what I am calling a "pass-through" to ovftool.

Let me give you one concrete example on how this could be useful and how we can take advantage of this new capability. Since the release of VCSA 6.0, when you enable SSH and you login, you will notice that you are not placed in a regular bash shell but rather a restricted appliancesh interface. From an Automation standpoint, it was some what painful if you wanted to change the default as this feature is not implemented within the JSON configuration file. This meant that if you wanted the bash shell to be the default, you had to either change it manually as part of a post-deployment or you would have to by-pass the native CLI Installer and manually reverse engineer the required set of OVF properties needed for the deployment which is also not ideal.

[Read more...]