WilliamLam.com

PowerShell for PhotonOS on Raspberry Pi 3

by // 4 Comments

Did you know VMware PhotonOS can also run on a Raspberry Pi (rPI) 3? I definitely did not until recently when I found out the latest 3.0 version also had an image for the rPI. This is great for anyone who is already familiar with PhotonOS and wish to run it in an even smaller form factor such as an rPI. There are definitely some interesting use cases for an rPI such as a tiny management host, troubleshooting tool for consultants or even a quick PowerShell/PowerCLI host that contains some basic tools and scripts which you can quickly access.

I was definitely interested in getting PowerShell and PowerCLI running on top PhotonOS on the rPI. Although you can already run PowerShell on an rPI using the Raspbian OS, the current distribution from Microsoft is actually only 32-Bit, which is a problem for PhotonOS as it is a 64-Bit OS. I was about to give up but while browsing the Microsoft PowerShell repo, I came across their upcoming PowerShell 6.2.0 (Preview) release which now looks to include a 64-Bit ARM build, which is exactly what I needed. For PowerCLI, although I was able to get the modules loaded, I was not able to connect to a vCenter Server or ESXi endpoint, you can find more details at the bottom of this post.

Below are the instructions for installing PhotonOS on the rPI and getting PowerShell setup:

Step 1 - Download and install the Etcher tool which will be used to flash our rPI

Step 2 - Download and install PhotonOS 3.0 RC rPI image using Etcher


Once PhotonOS has been installed, you can login (default credentials are root/changeme) and we now have PhotonOS running on our rPI!


Next we will install PowerShell as well as the latest PowerCLI modules.
[Read more...]

Workarounds for deploying PhotonOS 2.0 on vSphere, Fusion & Workstation

by // 2 Comments

PhotonOS 2.0 was just released last week and it includes a number of exciting new enhancements which you can read more about here. Over the last few days, I had noticed quite a few folks having issues deploying the latest PhotonOS OVA, including myself. I figure I would share the current workarounds after reaching out to the PhotonOS team and seeing the number of questions both internally and externally.

Deploying PhotonOS 2.0 on vSphere

If you are deploying the latest OVA using either the vSphere Web (Flex/H5) Client on vCenter Server or the ESXi Embedded Host Client on ESXi, you will notice that the import fails with the following error message:

The specified object /photon-custom-hw13-2.0-304b817/nvram could not be found.


This apparently is a known issue with the vSphere Web/H5 Client bug with exported vHW13 Virtual Machines. As I understand it, the actual fix did not make it in the latest vSphere 6.5 Update 1 release, but it should be available in a future update. After reporting this issue to the PhotonOS team as I ran into this myself, the team quickly re-spun the vHW11 OVA (since that image also had a different issue) which can now be imported into a vSphere environment using any of the UI-based Clients and/or CLIs. For now, the workaround is to download PhotonOS 2.0 "OVA with virtual hardware v11" if you are using vSphere OR you can install PhotonOS using the ISO.

Deploying PhotonOS 2.0 to Fusion/Workstation

UPDATE (11/08/17) - The PhotonOS team just published an additional OVA specifically for Fusion/Workstation which uses LSI Logic storage adapter as PVSCSI is currently not supported today. You can easily import latest PhotonOS 2.0 without needing to tweak the OVF as mentioned in the steps below, simply download the OVA with virtual hardware v11(Workstation and Fusion) and import normally via UI or CLI.

If you are deploying either of the vHW11 or vHW13 OVA to Fusion/Workstation, you see the following error message:

Invalid target disk adapter type: pvscsi


The reason for this issue is that neither Fusion/Workstation currently support the PVSCSI storage adapter type which the latest PhotonOS OVA uses. In the meantime, a workaround is to edit the OVA to use the LSI Logic adapter instead of the PVSCSI. Below are the steps to convert the OVA to OVF and then apply the single line change.

Step 1 - Use OVFTool (included with both Fusion/Workstation) to convert the OVA to an OVF which will allow us to edit the file. To do so, run the following command:

ovftool --allowExtraConfig photon-custom-hw13-2.0-304b817.ova photon-custom-hw13-2.0-304b817.ovf

Step 2 - Open the photon-custom-hw13-2.0-304b817.ovf using a text editor like Visual Studio Code or VI and update the following line from:

<rasd:ResourceSubType>VirtualSCSI</rasd:ResourceSubType>

to

<rasd:ResourceSubType>lsilogic</rasd:ResourceSubType>

and save the change.

Step 3 - Delete the OVF manifest file named photon-custom-hw13-2.0-304b817.mf since the contents of the file has been updated

Step 4 - You can now import the modified OVF. If you wish to get back the OVA, you can just re-run Step 1 and use the .ova extension to get back a single file

Upgrading from Photon 1.x to 2.0

I also noticed several folks were asking about upgrading from Photon 1.0 to 2.0, you can find the instructions below:

Step 1 - You may need to run the following if you have not done so in awhile:

tdnf distro-sync

Step 2 - Install the PhotonOS upgrade package by running the following command:

tdnf install photon-upgrade

Step 3 - Run the PhotonOS upgrade script and answer 'Y' to start the upgrade:

photon-upgrade.sh

Project USB to SDDC - Part 3

by // 30 Comments

OK, the wait is finally over! In this final article, we will now walk through the process of getting access to this project as well as how to get this deployed in your own environment. For those that just want to see the code, you can find it at the Github project below:

Github Project: https://github.com/lamw/usb-to-sddc

Below are the details outlining the environment and software requirements as well as the instructions to consume this in your own home lab environment. The content below is a subset of what is published on the Github project, but this should get you going. For more details, please refer to the Github project and if you have any issues/questions, feel free to file a Github issue.

Environment Requirements:

  • USB key that is at least 6GB in capacity
  • Access to either macOS or Linux system as the script that creates the USB key is only supported on these two platforms
  • No additional USB keys must be plugged into the hardware system other than the primary installer USB key
  • Hardware system must have at least 2 disk drives which can either be 1xHDD and 1xSSD for running Hybrid vSAN OR 2xSSD for running All-Flash vSAN
  • Both Intel NUC 6th Gen and Supermicro E200-8D and E300-8D have been tested with this solution. It should work with other hardware systems that meet the minimum requirements but YMMV

Software Requirements:

Note: Other ESXi / VCSA 6.5.x versions can also be substituted, this includes the latest ESXi 6.5d (vSAN 6.6) release which I have also verified myself.

UPDATE (04/17/18) - No changes are required to get vSphere 6.7 to work, the only minor thing to be aware of is that the vSphere Web Client customization has changed in 6.7 and so you need to set VCSA_WEBCLIENT_THEME_NAME="" as empty string or you will find that the UI will not load unless you delete the customization directory in the VCSA that was pulled down automatically.

[Read more...]