WilliamLam.com

Disabling IPv6 via Command-Line For ESXi 5.1 (Without Automatic Host Reboot)

by // 16 Comments

IPv6 for the VMkernel interface is now automatically enabled by default for the latest release of ESXi 5.1 and you may have also noticed the additional IP Address in DCUI after the host boots up.

IPv6 support has been around for awhile now and you can enable IPv6 by using the old vSphere C# Client or the new vSphere Web Client. If you enable or disable IPv6, you will need to perform a system reboot for the changes to go into effect. You also have the ability to enable/disable it via the DCUI, which also has been around for awhile as well.

UPDATE: 07/20/15 - For ESXi 6.0, the VMkernel module is name is now tcpip4 instead of tcpip3.

There is one very important thing to note if you do enable/disable IPv6 on the DCUI, after you made your changes and you wish to apply, there is a very important confirmation box that is displayed.

Carefully read the last sentence which is underline in red "In case IPv6 has been enabled or disabled this will restart your host". If you are not careful in reading the confirmation screen, you may hit yes and your host will issue a reboot. If you are going to use the DCUI to enable or disable IPv6, make sure you do not have any running VMs on your host and you should already have your host maintenance mode when making configuration changes to your host.

In addition to the two methods listed above (vSphere Web Client/C# CLient and DCUI) you can easily enable/disable IPv6 using ESXCLI (my preferred method) and restart the ESXi host when you get a chance.

To view whether IPv6 is currently enabled, run the following ESXCLI command (ESXi 5.5 Update 1 the VMkernel module is now called tcpip4):

esxcli system module parameters list -m tcpip3

As you can see from the screenshot above, ipv6 property is set to 1 which means it is enabled.

To disable IPv6, you just need to set the property to 0, run the following ESXCLI command:

esxcli system module parameters set -m tcpip3 -p ipv6=0

We can now reconfirm by re-running our list operation to ensure the changes were made successfully. All that is left is to perform a system reboot, you can either type in "reboot" or use the new ESXCLI 5.1 command:  

esxcli system shutdown reboot -d 60 -r "making IPv6 config changes"

Note: You can run the ESXCLI command locally on the ESXi Shell or you can run the same command remotely by specifying additional connection options & proxy through vCenter Server if you wish. Take a look here for additional connection options for ESXCLI.

Configuring New vSphere Web Client Session Timeout

by // 5 Comments

Just like you could in the old vSphere C# Client, users can also configure a session timeout for the new vSphere Web Client in the latest release of vSphere 5.1. This not only ensures that idle sessions automatically disconnect after a certain period of time but also helps reduce the resources consumed on the vCenter Server as each session allocates a certain amount of resources.

To configure the session timeout, you will need to login to the server running the vSphere Web Client service (which is usually your vCenter Server) and find the webclient.properties file and change the default timeout and then restart the vSphere Web Client service. For the VCSA, the default timeout value is 120 minutes and I assume it is the same default for the Windows vCenter Server.

Step 1 - Locate the webclient.properties file:

    VCSA 5.x

/var/lib/vmware/vsphere-client/webclient.properties

    VCSA 6.x

/etc/vmware/vsphere-client/webclient.properties

    Windows vCenter Server 5.x

%ALLUSERPROFILE%\VMware\vCenterServer\cfg\vsphere-client\webclient.properties

    Windows vCenter Server 6.x

%ALLUSERPROFILE%\VMware\vSphere Web Client\webclient.properties

Step 2 - Un-comment and change session.timeout value to desired value:

session.timeout = 120

Step 3 - Restart the vSphere Web Client Service:

/etc/init.d/vsphere-client restart

You will need to restart the vSphere Web Client service for the changes to go into effect. For the Windows vCenter Server, just restart the vSphere Web Client service and for the VCSA, run the above command.

In my lab, I configured the time out to be 1 minute, once the session has gone idle for the configured period, you will automatically be logged out and brought back to login page with the following message:

 

How to Use Custom VM Icons in the vSphere 5 Client

by // 3 Comments

Ever get tired of the same old virtual machine icons in the vSphere Client? Ever thought about changing it? Well with vSphere 5, you can! Here is a screenshot of some the custom icons I added for several virtual machines in my development lab.

One of the major enhancement in the vSphere 5 API is the introduction of the vCenter Solutions Manager, vSphere ESX Agent Manager, and vServices SDK. These various interfaces allows ISVs, partners and end users to easily extend the functionality of the vCenter Server and provide solutions that are tightly integrated via extensions/plugins that are aware of features such as vSphere HA, DRS and DPM.

Here what each of the interfaces provides:

vCenter Solutions Manager - is a view in the vSphere client where you can monitor and interact with the solutions that register with a vCenter Server instance. Solutions Manager shows three standard tabs for each running solution. The tabs list the virtual machines that a solution deploys and manages, show the health, name, company URL, version of the solution, and show any vServices that the solution provides.
vSphere ESX Agent Manager - automates the process of deploying and managing vSphere ESX agents. The services that ESX Agent Manager provides include out-of-the-box integration of agents with vSphere features such as DRS, AddHost, High Availability, DRM, and maintenance mode. All of these features can be difficult to integrate with manually. ESX Agent Manager also allows users to monitor the health of ESX agents, and blocks users from performing certain operations on ESX agents that might affect the virtual machines that use them. For example, ESX Agent Manager can prevent an ESX agent virtual machine from being powered off or moved from an ESX host that contains other virtual machines that use that agent.
vServices SDK - is a service that a solution provides to specific applications that run inside virtual machines and vApps. A solution can provide several types of vServices. Virtual machines or vApps can have dependencies on several types of vServices. A vService is similar to a virtual hardware device upon which virtual machines and vApps can depend. Instead of providing a piece of virtual hardware, vServices typically provide access to a service across a network. By providing a vService, a solution can expose application-aware services to virtual machines and vApps. For example, a vService can provide a backup service or a logging service to virtual machines and vApps.
For more details about these interfaces and how to implement them, take a look at the documentation here.

Even though these APIs are really meant for ISVs and partners to consume, if you would like to add a splash of color to your environment, you can use the following trick. At at high level we will be adding a new extension(s) which includes a mapping of a particular solution (e.g. logical name) to a particular icon that a virtual machine or vApp can be associated with. The icons must be 16x16 PNG format referenced by a URL. Once the custom extension has been created, you will then need to reconfigure the virtual machine(s) and associate the managedBy property to the solution's logical name key to update the virtual machine's icon.

You will need access to either the vCLI or vMA and the following two vSphere SDK for Perl scripts: registerCustomSolution.pl and updateVMManagedBy.pl You will also need access to vCenter Server 5 as this is not supported on an ESXi 5 host.

There is a very simple example in registerCustomSolution.pl which creates two extensions: one that includes custom icons and tabs that can link to any webpage (vGhetto) and one that only includes custom icons (Custom Application). You will need to edit the script so it fits your environment and there is a special variable in the script called "editedScript" which is set to 0 that prevents the script from running. This will ensure you do not accidentally create these extensions based on information in my development environment. Once you have updated the script, go ahead and change the value to a 1.

When you are ready, you will use the registerCustomSolution.pl script to create the extensions, here is an example:

To verify that the extensions were created properly with the information you provide, you can use pluginExtensionManager.pl to list all registered extensions. The command is the following: ./pluginExtensionManager.pl --operation list

You should see at the bottom of the output the extensions that were just registered and the associated configurations URL + icons. It is important to make note of the extension key (e.g. com.vmware.vGhetto) and the solution type string as that will be needed in the next section.

Now all we need to do is associate a particular virtual machine with the solution to update the virtual machine's default icon. You will use the updateVMManagedBy.pl script and using the extension key and type from the output from the previous screen.

To verify the icons have been updated, you will need to login to the vCenter Server and check out your virtual machines.You will also notice that on the right hand side of the virtual machine summary screen, there is a new "Managed By" section which includes a link to the vCenter Solution Manager.

Note: If you would like to reset or revert back to the original icons, you just need to use the  updateVMManagedBy.pl script and specify a empty string for the key. If you would like to unregister and remove the extension all together, you can use pluginExtensionManager.pl and perform remove operation.

Another way to view all the vCenter Solutions is on the home page and by clicking on the vCenter Solutions Manager icon.

From here you will see all registered vCenter extensions including some information about the vendor, version and health of the extension.

Here is a drill down into one of the extensions that contains several tabs to some URLs

As you can see, you can link to some useful URLs that can easily be accessible through the vSphere Client without having to go to your browser. Another neat feature of the tabs is to include any web management interfaces for a particular solution/vApp so that you can easily configure and manage the system from a single pane of glass.

In addition to this, you can also get a summary of the registered virtual machines with a given solution by clicking on the "Virtual Machines" tab and selecting "Managed By" box, the "Server" and "Agents" are reserved for ESX Agents.

There are also two caveats to be aware of if you decide to create custom icons for your virtual machines. The first is when you edit a virtual machine, you will get an annoying pop-up that states changes to the solution is not recommended. Under normal circumstance, where a solution/extension is provided by a 3rd party, you definitely do not want to manually tweak the virtual machine but in this scenario, it is fine.

The second thing I noticed is the custom icons do not properly show up in the nextgen vSphere Web Client, a default icon is used instead for virtual machines who have custom icons. I am not sure if this is a display bug with the vSphere Web Client or with the APIs.

So there you have it, if you are bored at looking at the same old icons and would like to differentiate some or all of your virtual machines, you now have the option to use custom icons.