WilliamLam.com

New Nested ESXi 6.x Content Library 

by // 14 Comments

A few years back I had showed how you could create and host your own 3rd Party vSphere Content Library which allows customers to decouple their content from the underlying vSphere environment and centralizing their content and making it available to number of vCenter Servers by simply just having an HTTP(s) endpoint. The other huge benefit is being able to take advantage of the existing web content tools for optimizing delivery or retrieval whether that is replication, caching, etc. and not relying a single vCenter Server for providing Content Library publication. In addition to showing how to create your own content libraries, I also had built my own 3rd Party vSphere Content Library which contains a variety of my Nested ESXi Templates (empty VM shells) running on Amazon S3 which can be consumed by anyone as long as you are running vCenter Server 6.0 or newer.

Although the empty Nested ESXi Templates were quite useful for myself and customers, it would have also been nice to include my pre-built Nested ESXi Virtual Appliances which I had recently updated to support vSphere 6.0 Update 3 and vSphere 6.5d (vSAN 6.6). Thanks to Dana Nourie, who runs our wildly popular VMware Flings Program, was kind enough to help me with the content hosting and now anyone can also subscribe to my Nested ESXi VA's and automatically have the content sync down using the vSphere Content Library feature.

UPDATE 1 (07/31/17) - The Nested ESXi Content Library has been updated to include the latest ESXi 6.5 Update 1 VA. If you are already subscribing to the library, it should have already pulled down the content (or at least the metadata which you can then force synchronization) or you can simply subscribe to the library and have access to the latest ESXi VA.

UPDATE 2 (05/07/18) - The Nested ESXi Content Library has been updated to include the latest ESXi 6.5 Update 2 VA. If you are already subscribing to the library, it should have already pulled down the content (or at least the metadata which you can then force synchronization) or you can simply subscribe to the library and have access to the latest ESXi VA.

To get started, just create a new vSphere Content Library and enter the following subscription URL: https://download3.vmware.com/software/vmw-tools/lib.json 


You can either download the content immediately or only when you need to use it. I recommend the former since its only two images which totals up to a whopping 1GB 😉

Once the creation of the Content Library has been completed, you should see the following two Nested ESXi VAs in the library which are now ready for deployment!


For more information about the Nested ESXi 6.0u3/6.5d VA's and how they work, please have a look at this blog post here. For more information about the Nested ESXi Templates and how to subscribe to the 3rd Party vSphere Content Library, please have a look at this blog post here.

Updated Nested ESXi 6.0u3 & 6.5d Virtual Appliances

by // 27 Comments

I finally found a bit of "extra" spare time to update my Nested ESXi Virtual Appliances to support some of the recent releases of ESXi, 6.0 Update 3 and 6.5d, which enables customers to easily and quickly deploy vSAN 6.6 in their environment for testing, development or learning purposes. If you have not used this appliance before, please have a look at this article which goes into greater detail on how to deploy and use the Nested ESXi VA.

As part of this update, I also spent some time looking at all the feedback that I had received from the community since releasing the VA and I took this opportunity to also add some nice enhancements that folks have been asking about 🙂 Jump towards the bottom to see what's new. To reduce the number of VA's that I need to manage and due to usage, the following VA's have recently been decommissioned. I only plan on supporting the latest versions which you can find in the links below.

Decommissioned VA's:

  • ESXi 5.5 Update 3 (Nested_ESXi5.x_Appliance_Template_v2.ova)
  • ESXi 6.0 Update 2 (Nested_ESXi6.x_Appliance_Template_v5.ova)
  • ESXi 6.5 GA (Nested_ESXi6.5_Appliance_Template_v1.ova)

New VA's:

What's New:

  • Support for DHCP 
    • I know this might sound pretty basic but before you were required to specify a static IP (even if you had DHCP). By default, you no longer need to fill out the networking section as highlighted in yellow below.
  • Support for default root password
    • You no longer need to provide root password, it will default to the famous VMware1! The issue in the past was that I had randomly generated a password which I discarded and when the customization failed, it was very difficult to troubleshoot since I do not actually have the password 😉 Hopefully we do not have any other bugs, but this will make debugging easier and also reduce the amount of input if you want to quickly spin up an ESXi instance.
  • Support for VLAN ID
    • Though not a huge number of requests, there were still of you who asked for 802.1q (trunk) support on Management VMkernel interface. This is an optional field and obviously this is only applicable if you provide a static IP Address.
  • Automatic removal of Customization VIB
    • As some of you may or may not know, the way in which these OVF properties are processed within the Nested ESXi instance is a special firstboot script which reads in these values and then applies the ESXi customization. If everything is successful, there really is no use for this to exists further and although you could set a certain advanced setting to force re-customization, it was quicker to just re-deploy. With that in mind, the customization VIB is now automatically removed once its done its job. I have included a special debug option that would allow it to not be deleted in scenarios where there are issues and we need to take a look at the state of the system. With this change, you really now have a "vanilla" ESXi instance 🙂
  • Fixed dvFilter param for eth1


Hope you enjoy some of these new updates and happy Nesting!

Auditing & Automating Disabled Protocols (TLS/SSLv3) for ESXi 6.0u3 & 6.5 using PowerCLI

by // 32 Comments

A couple of weeks back, I had received a question from one of our TAMs in regards to automating the disablement of specific TLS/SSL protocols for their ESXi 6.0 Update 3 hosts. As of vSphere 6.0 Update 3 and vSphere 6.5, customers now have the ability to completely disable TLS 1.0, TLS 1.1 and SSLv3 using the new TLS Reconfiguration Tool. Mike Foley did a nice write up here if you are interested in more details.

The TLS Reconfiguration Tool works well if you have the same version of vSphere for both your vCenter Server and ESXi host, but has challenges when you are in a mixed environment like this particular customer. In their environment, they are running vCenter Server 6.5 and ESXi 6.5 Update 3 which prevented them from using the TLS Reconfiguration Tool as this is a limitation with the tool today.

UPDATE (05/11/17) - Added support for ESXi 6.5 hosts as well

Given the TLS Reconfiguration Tool was written in Python, I was able to take a closer look at its implementation and I found that the settings that controlled the disabled protocols were just merely a few ESXi Advanced Settings which meant that this could be automated using standard vSphere Automation Tools that our customers were already familiar with. As part of this exercise, I also discovered the tool currently does NOT support disabling TLS/SSLv3 protocols for the Small Footprint CIM Broker (SFCB) service which is also required if you want to be in full compliance for a particular TLS protocol. Although there is not a direct SFCB API that allows you to manage the sfcb.cfg configuration file, there is still a way we can automate this without requiring SSH to the ESXi host which would technically be the alternative. Lastly, I was a bit surprised to see the TLS Reconfiguration Tool did not have a "query" option for listing the current disabled protocols for all ESXi hosts, but they do have it for vCenter Server itself.

To help this particular customer and others who may have specific TLS compliance requirements, I have created the following PowerCLI script called ESXiDisableProtocolConfiguration.ps1 which includes the following two functions:

  • Get-ESXiDPC - Retrieve the current disabled protocols for all ESXi hosts within a vSphere Cluster
  • Set-ESXiDPC - Configure the specific disabled protocols for all ESXi hosts within a vSphere Cluster

[Read more...]