WilliamLam.com

How to simulate Persistent Memory (PMem) in vSphere 6.7 for educational purposes? 

by // 6 Comments

A really cool new capability that was introduced in vSphere 6.7 is the support for the extremely fast memory technology known as non-volatile memory (NVM), also known as persistent memory (PMem). Customers can now benefit from the high data transfer rate of volatile memory with the persistence and resiliency of traditional storage. As of this blog post, both Dell and HP have Persistent Memory support and you can see the list of supported devices and systems here and here.


PMem can be consumed in one of two methods:

  • Virtual PMem (vPMem) - In this mode, the GuestOS is actually PMem-aware and can consume the physical PMem device on the ESXi host as standard, byte-addressable memory. In addition to using an OS that supports PMem, you will also need to ensure that the VM is running the latest Virtual Hardware 14
  • Virtual PMem Disks (vPMemDisk) - In this mode, the GuestOS is NOT PMem-aware and does not have access to the physical PMem device. Instead, a new virtual PMem hard disk can be created and attached to a VM. To ensure the PMem hard disk is placed on the PMem Datastore as part of this workflow, a new PMem VM Storage Policy will be applied automatically. There are no additional GuestOS or VM Virtual Hardware requirement for this scenario, this is great for legacy OS that are not PMem-aware

Customers who may want to familiarize themselves with these new PMem workflows, especially for Automation or educational purposes, could definitely benefit from the ability to simulate PMem in their vSphere environment prior to obtaining a physical PMem device. Fortunately, this is something you can actually do if you have some additional spare memory from your physical ESXi host.

Disclaimer: This is not officially supported by VMware. Unlike a real physical PMem device where your data will be persisted upon a reboot, the simulated method will NOT persist your data. Please use this at your own risk and do not place important or critical VMs using this method.

[Read more...]

Leveraging Instant Clone in vSphere 6.7 for extremely fast Nested ESXi provisioning

by // 19 Comments

The idea of "Instant Cloning" a Nested ESXi VM (running ESXi in a VM) is not a new concept. In fact, I had shared a solution back in 2015 using the private VMFork APIs. However, what has changed is the ease of consumption, primarily due to the re-architecture of Instant Clone in vSphere 6.7 (more details here and here) which resulted in a public and simplified API. Some of you might ask, why not simply clone a Nested ESXi VM or create a Link Clone? What benefit would I get by using Instant Clone?

The answer is not only speed, but the fact that the instantiated VM is fully operational and ready to start executing where as a traditional full clone or linked clone requires a full OS boot up that can take up to several minutes to deploy and configure. This may not sound like much for a small number of Nested ESXi VMs, but as you increase the number of instances, Instant Clone really shines while still maintaining speed and the instant availability of the VM. As you can imagine, this definitely opens up for some interesting use cases whether it be for personal home lab or educational purposes like VMware HOL. In addition, we also have customers who deploy Nested ESXi not only at high scale but also with a high churn rate for development purposes, think CI/CD type of a workload who can also benefit from Instant Clone.

So how fast are we talking about? Lets say you wanted to test out the latest version of VSAN in vSphere 6.7, you would normally deploy 3 Nested ESXi VMs, power them up and wait for them to be ready on the network. With Instant Clone, you can deploy three fully functional Nested ESXi VMs in just 30seconds! As the VMs are instantly available for consumption, you can start the VSAN enablement workflow immediately and even parts of that can be baked into the Instant Clone workflow. With the ease of provisioning Nested ESXi VMs, you can simply maintain a catalog of ESXi templates which are in "frozen" states and then leverage Instant Clone to deploy just-in-time Nested ESXi environments and discard them once you are done. Pretty slick if you ask me! and something I plan on using going forward.

Disclaimer: Nested ESXi is still not officially supported by VMware. Please use at your own risk.

[Read more...]

Changes to vSphere Client Login UI customizations in vSphere 6.7

by // 11 Comments

For those that have customized their vSphere Client Login UI using the instructions here and here, it looks like the process can not be applied to the vSphere 6.7 release. From what I can tell, it looks like we have now consolidated the various WAR files into a single file /usr/lib/vmware-sso/vmware-sts/webapps/ROOT.war. The original contents of the websso directory, which pertains to the UI customization, is now located here. This was a fairly minor change, but something to be aware of and for details on how to persist your configuration changes, please see the instructions below.

UPDATE (11/19/22) - As of vSphere 8, the webapp WAR file is now located in /var/lib/sso/webapps/ROOT.war

Disclaimer: This is not officially supported by VMware. If you decide to enable this, please use at your own risk and ensure you backup all original files in case you need revert back to the original configuration.

As part of looking into this, I also had some fun incorporating a cool little animated login page directly into the vSphere UI which I had shared on Twitter yesterday. Stay tuned for more details on #vYetti 🙂

[Read more...]