One of the most exciting new feature in VSAN 6.1 is the new Stretched Clustering capability which also provides support for a 2-Node ROBO deployment. If you are interested in learning more about the new VSAN 6.1 capabilities, be sure to check out Duncan's blog post here as well as a video on how to configure the new VSAN Stretched Clustering here. Like many of you, I am sure you are looking forward to giving both vSphere 6.0 Update 1 as well as the new VSAN 6.1 capabilities a spin in your home lab or development environment. By now, you probably know how easy it is to run Nested ESXi on top of your existing vSphere environment. However, not everyone has access to a vSphere environment. The next best thing is using VMware Fusion and Workstation which also supports Nested ESXi and for many of our customers and field, it is a great solution as it allows you to easily play with all the VMware goodies while you are on the go, especially useful if you travel frequently.
I was interested in setting up a 2-Node VSAN configuration and as part of the setup, you will also need to deploy the new VSAN Witness Virtual Appliance. I wanted to see what it would take to deploy the VSAN Witness Appliance onto VMware Fusion and Workstation and after a bit of exploration, hair pulling and OVF hackery, I was able to finally work out the process as shown in the steps below.
Disclaimer: This is not officially supported by VMware, please use this only for evaluational and testing purposes.
Note: If you plan on deploying the VSAN Witness Appliance directly to an ESXi host, you can use the injectOvfEnv method shown here.
Step 1 - Download the VSAN 6.1 Witness Virtual Appliance OVA from here
Step 2 - We need to make a few minor adjustments to the OVF file before we can import it into VMware Fusion/Workstation. Before we do so, we need to first convert the OVA to an OVF using ovftool.
Here is an example of running this on Mac OS X system:
/Applications/VMware\ OVF\ Tool/ovftool VMware-VirtualSAN-Witness-6.0.0.update01-3029758.ova VMware-VirtualSAN-Witness-6.0.0.update01-3029758.ovf
Once the conversion has completed, you should see a total of 8 files (6 VMDK files, 1 manifest & 1 OVF file). Before moving onto the next step, you will need to delete the manifest file (extension ending in .mf). We need to do this because the checksum will no longer be valid after we edit the OVF and the upload will fail.
Step 3 - The first edit that we need to make in the OVF is to change the required OVF parameter for specifying the password to the VSAN Witness Appliance from "true" to "false" since both Fusion/Workstation do not support OVF properties.
Change the following from
<ProductSection ovf:class="vsan" ovf:required="true">
<ProductSection ovf:class="vsan" ovf:required="false">
Step 4 - The final edit that we need to make in the OVF is to specify the deployment size (tiny, medium or large) for the Witness VM. By default, it will use the medium option. Below is a quick table of the deployment size and for evaluation/testing purposes, I suspect most you will want to stick with the "tiny" configuration.
|tiny||2||8GB||1x8GB 1x15GB 1x10GB||750|
|medium||2||16GB||1x8GB 1x350GB 1x10GB||22K|
|large||2||32GB||1x8GB 1x350GB 1x10GB||45K|
The way this is specified in the OVF is by adding ovf:default="true" to the specific deployment size. As mentioned, by default this is set to the "medium" deployment size which looks like the following:
<Configuration ovf:default="true" ovf:id="normal">
If you wish to change this to some other deployment size, you will need to move the ovf:default="true" entry to the deployment size you wish to use. In our case, we will move it to "tiny" size by adding the following
<Configuration ovf:default="true" ovf:id="tiny">
Step 5 - Now that we are done with the OVF surgery, we can now import our VSAN Witness OVF into VMware Fusion or Workstation using the "Import" option. Ensure you select "Customize" option after the import has completed to prevent the VM from automatically powering on. This is very important because we still need to add one final configuration to the VMX file for the appliance to be properly configured.
Step 6 - The last and final step is to add a VMX entry which will configure the root password for VSAN Witness Appliance. This is not necessary when deploying to vCenter Server which has OVF support, but is a problem when deploying VMware Fusion, Workstation and even ESXi. You will need to add the following entry to the VMX file and be sure to replace the password of your choice which is highlighted below in blue.
guestinfo.ovfEnv = "<?xml version='1.0' encoding='UTF-8'?><Environment xmlns='http://schemas.dmtf.org/ovf/environment/1' xmlns:oe='http://schemas.dmtf.org/ovf/environment/1'><PropertySection><Property oe:key='vsan.witness.root.passwd' oe:value='vmware123'/></PropertySection></Environment>"
Step 7 - You are now ready to power on your VSAN Witness and if everything was configured correctly, you should be able to login to DCUI of the VSAN Witness which as you probably have guessed by now is running Nested ESXi 🙂
Here is a quick screenshot of configuring my very first 2-Node / Stretched VSAN Cluster which is comprised of 2 Nested ESXi VMs running on my Mac Mini which is running vSphere 6.0 Update 1 and my VSAN Witness Appliance running on my iMac using VMware Fusion. If you need additional instructions on configuring either a 2-Node / Stretched VSAN Cluster, be sure to check out the how-to video here. I plan to share this feedback internally with Engineering and hopefully deploying VSAN Witness in the future can be much more easier when it comes to running it on VMware Fusion and Workstation.