WilliamLam.com

'System.Management.Automation.ConfigPropertyAccessor' exception when launching PowerCLI Core in Linux firstboot script

by // Leave a Comment

Happy New Years everyone!

I just got back into the swing of things after taking some much needed time off over the holiday break. While catching up on my email, I also re-visited one of my pet projects I had been working on right before the break. I needed to launch a specific PowerCLI script upon firstboot from a Linux system, specifically PhotonOS leveraging PowerCLICore. My first few attempts had failed and in troubleshooting the issue further, I found the following cryptic error message in the system logs:

The shell cannot be started. A failure occurred during initialization:
The type initializer for 'System.Management.Automation.ConfigPropertyAccessor' threw an exception.

After a bit of Googling, I found the following Github PR which seems to indicate that the HOME environmental variable may not properly configured or readable by Powershell. The quick fix was to simply define the HOME directory within the shell script that starts up the PowerCLI script.

Below is a snippet of what I needed to add to /etc/rc.d/rc.local to automatically run my PowerCLI script:

export HOME=/root

/usr/bin/powershell -File /root/MyPowerCLI-Script.ps1

The following command was also useful in troubleshooting and verifying that my PowerCLI script had properly executed since there was no output in my script log:

journalctl --no-pager | grep rc.local

Automated deployment and setup of vRealize Network Insight (vRNI)

by // 8 Comments

Earlier last week I had deployed the latest version of vRealize Network Insight (vRNI) 3.2 in my home lab to learn more about the product and its capabilities. The vRNI setup involves involves deploying two Virtual Machines, the first being the main vRNI Platform OVA. Once the vRNI Platform VM has been deployed, you will need to activate it with a license key and then generate a shared secret which is then used to deploy the vRNI Proxy OVA. Using the share secret, the vRNI Platform VM will be able to automatically detect when the vRNI Proxy VM is on the network and associate it with the deployment.

The workflow is pretty straight forward but as many of you know me, if I need to manually do something once, it means I should probably automate it for the future 🙂 I had looked around the documentation and did not see any published APIs for the initial setup and configuration. Although a CLI exists, it was only available post-deployment and it required SSH which I did not want to have to rely upon. I ended up reverse engineering the UI to replicate the workflow from an automation standpoint. I created a small PowerCLI script called vRNI-Deploy.ps1 and below are the instructions on using the script.

Step 0 - Obtain a vRNI License Key, which is required to setup vRNI. You may need to work with your VMware Account team or contact VMware Sales to get an evaluation license key.

Step 1 - Download both the vRNI 3.2 Platform and Proxy OVA from here.

Step 2 - Download the vRNI-Deploy.ps1 script to a system that has the latest release of PowerCLI 6.5 R1 installed.

Step 3 - Edit the following sections of the script which you can find more details below:

The full path to both the vRNI Platform and Proxy OVAs:

$vRNIPlatformOVA
$vRNIProxyOVA

The vRNI License Key:

$vRNILicenseKey

The configuration of the vRNI Platform VM:

$vRNIPlatformVMName
$vRNIPlatformIPAddress
$vRNIPlatformNetmask
$vRNIPlatformGateway

The configuration of the vRNI Proxy VM:

$vRNIProxyVMName
$vRNIProxyIPAddress
$vRNIProxyNetmask
$vRNIProxyGateway

General deployment configuration for both VMs:

$DeploymentSize
$DNS
$DNSDomain
$NTPServer
$VMCluster
$VMDatastore
$VMNetwork

Note: The medium (smallest) deployment requires at least 42GB of memory (32GB reserved for Platform VM and 10GB reserved for the Proxy VM). Please ensure you have sufficient resources before deploying into your environment.

[Read more...]

How to automate the deployment of an un-configured VCSA 6.5 (Stage 1 only)?

by // 2 Comments

In vSphere 6.5, the VCSA deployment has changed from a "Single" monolithic stage where a user inputs all of the required parameters up front and then the installer goes and deploys/configures the VCSA. In the new VCSA UI Installer, we still continue to provide a "Single" monolithic user experience but behind the scenes, the deployment is now actually composed of two distinct stages, creatively called Stage 1 and Stage 2.

  • Stage 1 - Initial OVA deployment which includes basic networking + OS password
  • Stage 2 - Applying the VCSA specific configurations (e.g. External Platform Services or Embedded VCSA)

One reason why this is so useful is that in previous releases of the VCSA, if you had fat fingered say the DNS entry or wanted to change the IP Address/Hostname before applying the actual application configurations, your only option was to re-deploy the VCSA, not a very good user experience. With this new deployment model, customers now have the ability to either go through both Stage 1 and Stage2 or they can stop just after Stage 1 which would allow them to make necessary edits before continuing to Stage 2. If you decide to stop after Stage 1, then to complete the deployment, you will need to open a browser and finish the configuration using the VCSA's Virtual Appliance Management Interface (VAMI) at https://[VCSA-HOSTNAME-OR-IP]:5480

vcsa-6-5-installer-3
Once on the VAMI UI, you will want to select the "Set up vCenter Server Appliance" which will then launch the configuration wizard. From here, you will have the option of changing some of the settings that you had provided in Stage 1 such as the IP Address or things like NTP or enabling SSH access as shown in the screenshot below. Once you have confirmed these settings, it will be saved and then you will move onto Stage 2 to complete the configuration of your VCSA deployment.

[Read more...]