WilliamLam.com

Removable M.2 NVMe SSD PCIe enclosure by Icy Dock

by // 8 Comments

My homelab is a constant experiment and hardware components are moved around for various testing, especially when it comes to networking and storage. When needing to move around an M.2 NVMe SSD, complexity of taking apart a system will vary on the platform but generally it is inconvenience. When I came to learn that Icy Dock, a manufacturer of storage enclosures, will be releasing a removable M.2 NVMe SSD tray that is connected to PCIe expansion slot, I knew I had to get my hands on it.


The good folks over at Icy Dock were kind enough to send me an early evaluational unit of the upcoming MB840M2P-B which is now available for $69. will be released in August and should retail for around $80 USD (final prices are still TBD). The use case above may not apply to most folks and is probably unique to my specific hardware usage but I think this is still a very interesting solution that is still useful to be aware of if you are your own homelab whitebox and have a spare PCIe slot. Icy Dock also produces many other types of storage enclosures that you might find interesting based your own needs.

For my setup, I installed the MB840M2P-B into my Intel NUC 9 Pro, which is definitely not easy to take apart. This is especially true for the two M.2 which is attached to the NUC Element but even more painful to get to the 3rd M.2 which is located under the baseboard. For my specific use case, this was well worth using up one of the PCIe slots on the NUC 9 Pro! This enclosure can also be added to the new 2019 Mac Pro which is another platform that Icy Dock sees benefiting from this solution.

[Read more...]

Configuring dnsmasq as PXE Server for ESXi 

by // 2 Comments

One really cool thing that I came to learn while setting up the infrastructure to network boot the latest Raspberry Pi 4 was the use of dnsmasq, which I have used in the past but I did not realize it could do so much more. In addition to providing DNS services, it can also be configured to run TFTP and provide DHCP capabilities which can then be used to support PXE installations.

Another neat feature of dnsmasq is ability to proxy to an existing DHCP server which is extremely useful for anyone with an existing DHCP infrastructure. Given the simplicity of dnsmasq and having already set this up for the rPI, I figure it would also be useful to take folks through in setting up dnsmasq to also support ESXi installations over PXE, since this still comes up from new folks just getting started with ESXi kickstart automation.

For more details about PXE installation of ESXi, I highly recommend this whitepaper and although it states 6.0, the concepts and configurations are still applicable to the latest ESXi 7.0 release.

[Read more...]

How to patch Intel NUC 10 with latest ESXi 7.0 update?

by // 33 Comments

vSphere 7.0b was just released last week and one of the important fixes was to resolve an issue where Nested ESXi VMs were crashing upon powering on an inner-guest VM. This looks to have also affect newer generations of CPUs including Intel's 10th Gen Comet Lake which is also found in the latest 10th Gen Intel NUCs (Frost Canyon).

A number of folks quickly found that if you simply applied the ESXi 7.0b patch, an unexpected behavior occurred on the 10th Gen Intel NUCs and the onboard networking was lost upon a reboot. This occurs as the original ne1000 driver which had been replaced with a newer version found within ESXi 7.0b no longer recognizes the onboard Intel NIC. The solution is quite simple, create a new Image Profile that contains the Intel NUC NIC Driver.

Several of you have asked for instructions and although this is a pretty common vSphere workflow, I have documented the two supported options using the vSphere Image Builder utility but there are definitely other methods which will have the same results. If you have access to a vCenter Server 6.7 or newer, I recommend using the Image Builder UI. If vCenter Server access is not available, then you can use Image Builder with PowerCLI, however you will need to have access to a Windows machine as the Image Builder cmdlet is not supported with PowerCLI Core.

Note: There is currently a known bug with the Image Builder UI when using vSphere 7 which will prevent you from authoring a new Image Profile. A workaround would be to deploy a VCSA 6.7 which does not have this issue when looking to use the Image Builder UI.

[Read more...]