WilliamLam.com

Automatically Join Multiple VCSA 5.1 using New vCenter SSO (Single Sign-On)

by // 12 Comments

You may have recently heard about the new vCenter SSO (Single Sign-On) feature that is now part of the latest release of vSphere 5.1 which provides centralized authentication and directory services (supports multiple identify sources) across your vCenter Servers. vCenter SSO also provides a true single pane of glass for managing and viewing all your vSphere infrastructure and solutions, unlike it's predecessor Linked Mode feature, which many used to get a centralized view of all their vCenter Servers but without the true single-sign on capabilities.

Note: If you would like to learn more about the new vCenter SSO, I would recommend you take a look at the What's New vCenter Server 5.1 whitepaper by Justin King. 

I really love the new vCenter SSO feature, especially in my home lab where I have several vCenter Server 5.0 and 5.1 hosts running and I can view all of them in a single interface! One thing I tend to do a lot in my lab is automated deployments (you probably might have already guessed) and though the configuration web interface for vCenter Server is pretty easy to use, there is still a lot of clicking involved (as you know, I hate clicking a lot).

Just like with automating VCSA 5.1 deployments, I also looked into automating the joining of a VCSA to an existing vCenter SSO server. The example below will outline configuring a single VCSA to act as the primary vCenter SSO server and then configure two additional VCSA which will then connect to this primary vCenter Server providing them SSO capabilities.You can also run through this manually through the configuration web interface for each VCSA, but as mentioned earlier, it is manual and did I forget to mention ... tedious!

Disclaimer: This is for educational purposes only, this is not officially supported by VMware. Please test this in a development environment before using it on actual systems.

Step 1 - Configure your primary VCSA which will be the main SSO server. You will be leveraging the same script as shown in this article. 

Step 2 - Next, you will need to configure you secondary and tertiary (or n-others) VCSA using a similar script as in Step 1, but instead of configuring for an embedded SSO server, it will connect to the external SSO server which is specified by the IP Address or hostname of your primary VCSA.

Here is a script with the minimal commands needed for configuring your additional VCSA:
Note: Make sure you update the PRIMARY_VC variable to reflect the IP Address or hostname of your primary VCSA that was configured in Step 1

You will notice the output to be very similar, but it actually queries for the primary VCSA's lookupservice SSL thumbprint to configure the VCSA to use an external SSO server.

Once you have successfully deployed and configure your additional VCSA servers, you should now be able to login to your primary VCSA and view all your vCenter Servers in the inventory.

Is this not a cool feature!? You no longer have to manage dozen of vSphere C# Clients to get a view of your vSphere infrastructure!

How to Create an SE Sparse (Space-Efficient) Disk in vSphere 5.1

by // 8 Comments

You probably may have heard, that with the upcoming release of vSphere 5.1, a new virtual machine disk format will be introduced called called SE Sparse (Space-Efficient). One of it's features is to provide the ability to reclaim unused blocks from within the guestOS. I would highly recommend you check out a recent blog post vSphere 5.1 Storage Enhancements – Part 2: SE Sparse Disks by Cormac Hogan for more details about the new SE Sparse disk format as well as other storage improvements in vSphere 5.1.

As Cormac points out, this new disk format will initially be leveraged by VMware View (in a future release from my understanding), as there are additional integrations required to use this feature than just using the new SE Sparse disk format. Having said that, the SE Sparse disk format is a feature of the vSphere 5.1 platform and with that, you do have the ability to create an SE Sparse disk.

Disclaimer: This is for educational purposes only, this is not officially supported by VMware. Please test this in a development environment before using it on actual systems.

There are two methods in which you can create an SE Sparse disk, directly on the ESXi Shell of an ESXi 5.1 host or remotely connecting to an ESXi 5.1 host.

Option 1 - Using vmkfstools on ESXi Shell 

Though it may not be documented, you can easily create a new VMDK with the new SE Sparse disk format by running the following command (10GB disk in this example):

vmkfstools -c 10g -d sesparse WindowsXP.vmdk

Here is a screenshot of new SE Sparse disk descriptor file to prove we have successfully created a new VMDK using the new format:

Option 2 - Using vSphere 5.1 API w/modified remote version of vmkfstools

As mentioned, the SE Sparse disk format is a feature of the vSphere 5.1 platform and as so, you can also leverage the vSphere 5.1 API to create a new VMDK using the virtualDiskManager and specifying the new SeSparseVirtualDiskSpec.

Note: Even though the vSphere API reference mentions the ability to set grain size via grainSizeKb property, I have found that it is not possible and just leaving it blank will automatically default to 1024K (1MB) which might be a system default for now.

You can download the modified version of the remote vmkfstools called vmkfstools-lamw which requires the the installation of vCLI 5.1 or vMA 5.1.

Here is an example of creating the same 10GB VMDK using the new SE Sparse disk format:

./vmkfstools-lamw --server 172.30.0.187 --username root -c 10G -d sesparse "[datastore1] WindowsXP.vmdk"

After you have created your new SE Sparse disk, the next logical step is assign it to a virtual machine. Since this is a new feature in vSphere 5.1, you will need to use the new vSphere Web Client to perform the operation as the legacy vSphere C# Client is not aware of this new disk type. You will also need to ensure that the virtual machine is running the latest ESXi 5.1 compatibility and later (virtual hardware version 9).

Once you have added our newly created disk from the datastore, it should now show up in the vSphere Web Client as Flex-SE for the disk type.

Additional Resources:

 

Have a Cool Idea for VMware Fling? Win a Free Pass to VMworld 2013!

by // Leave a Comment

Just like the title states, if you have a cool idea for a VMware Fling, you could win a free pass to VMworld 2013! If you missed the news during the first day of VMworld, there was a contest that was kicked off called the VMware Open Innovation 2012 Contest which provides a way for you to submit ideas for future VMware Flings that you wish you had today.

Have you ever used or heard of Onyx, Auto Deploy GUI, esxplot, etc? These are all VMware Flings from the VMware Labs. If you have not heard of the VMware Flings, I highly recommend you check out the site as there are tons of awesome tools that are completely FREE to download and use!

If your idea is selected, not only would you win a free pass to next year's VMworld 2013, but VMware engineers could also be building your tool based on your idea! Now that is COOL!

So, you have an idea for a Fling? Register here to get started, the contest ends on Oct 31, 2012 11:59 PM PST! As of writing this, there have only been 11 submissions (VMware employees are not eligible to win) so that brings the count down to 9, so your chances a very good! 😀