WilliamLam.com

Search Results for: NUC

Complete vSphere with Tanzu homelab with just 32GB of memory!

by // 43 Comments

Since the release of vSphere 7.0 Update 1, the demand and interests from the community on getting hands on with vSphere with Tanzu and the new simplified networking solution, has been non-stop. Most folks are either upgrading their existing homelab or looking to purchase new hardware that can better support the new features of the vSphere 7.0 release.

Although vSphere with Tanzu now has a flavor that does not require NSX-T which helps reduces the barrier on getting started, it still has some networking requirements which may not be easily met in for all lab environments. In fact, this was actually the primary reason I had started to look into this since my personal homelab network is very basic and I do not have nor want a switch that can support multiple VLANs, which is one of the requirements for vSphere with Tanzu.

While investigating for a potential solution, which included way too MANY hours of debugging and troubleshooting, I also thought about the absolute minimal amount of resources I could get away with after put everything together. To be clear, my homelab is comprised of a single Supermicro E200-8D which has 128GB of memory and that has served me well over the years and I highly recommend it for anyone that can fit that into their budget. With that said, I did set out with a pretty aggressive goal of using something that is pretty common in VMware homelabs which is an Intel NUC and with just 32GB of memory.

UPDATE (07/02/24) - As of vSphere 8.0 Update 3, you no longer have the ability to configure a single Supervisor Control Plane VM using the minmaster and maxmasters parameters, which have also been removed from /etc/vmware/wcp/wcpsvc.yaml in favor of allowing users to control this configuration programmatically as part of enabling vSphere IaaS (formally known as vSphere with Tanzu). The updated vSphere IaaS API that allows users to specify number of Supervisor Control Plane VM will not be available until the next major vSphere release. While this regressed capability is unfortunate, it was also not an officially supported configuration and for users who wish to specify the number of Supervisor Control Plane VM using YAML method, you will need to use an earlier version of vSphere.

[Read more...]

Quick Tip - Rebooting VCSA causes vSphere with Tanzu to show ESXi hosts not licensed for Workload Management

by // 12 Comments

I had just setup a new vSphere with Tanzu environment running on my Intel NUC for an upcoming blog post and after rebooting the vCenter Server Appliance (VCSA), I had noticed the Workload Management UI threw the following licensing error:

None of the hosts connected to this vCenter are licensed for Workload Management.

This was quite strange since both the ESXi host and VCSA was just installed less than a day ago which I was using the default 60 day evaluation that is automatically built in.

The even weirder thing was that I was still able perform operations using the Workload Management APIs, so I figured this must be a vSphere UI bug but could not find a way to get the UI to display. After reaching out to some folks internally, a suggestion was given on using either incognito mode or another browser and to my surprise, that fixed the problem! I suspect there is some cookie that was set during the initial Workload Management enablement when going through the evaluation workflow which now causes this unexpected early check for licensing.

I have already filed an internal bug but if you do hit this problem, simply clear your cookies for the the VCSA and the Workload Management UI will not properly display again.

Using ESXi-Arm Fling as a lightweight vSphere Automation environment for PowerCLI and Terraform

by // 1 Comment

A set of use cases that I was really excited for when I first heard about ESXi-Arm a few years ago was around the topic of vSphere Automation and Development. I speak with many customers who are just starting out on their Automation journey whether that is using PowerCLI, one of our many vSphere Automation SDK or even directly to the new vCenter REST API which all new features are being exposed through these days.

One of the biggest challenge for new comers is simply getting access to hardware that they can start playing around with and although there are is plethora of vSphere Homelab choices, it does require some amount of investment, which is definitely worth it in the long run. However, if you are just getting started and maybe you want something that is a bit more lighter weight, there are not too many options outside of an Intel NUC. I know many consultants actually carry around an Intel NUC that contains several VM images that they use to with their clients, including demos.

With the small form factor, low cost and reduced power consumption of the Raspberry Pi, I think this really opens up the door for some interesting creative solutions:

  • Basic vSphere footprint that can be used for work or learning purposes
  • Easy way to learn and explore the vSphere API with an actual host and enabling real VM deployments
  • Trying out Infrastructure-as-Code (IaC) tools such as Terraform and Ansible
  • Quick way to run through basic demos in front of customers
  • On-demand and self-contained lab environment for small Hackathon at your local VMUG or even at VMworld

Something I was really interested in early on was to be able to use ESXi-Arm with the Raspberry Pi to not only have a basic ESXi environment but also have PowerCLI environment up and running in an Arm VM. My first thought was to get this setup using Photon OS, which not only has Arm distribution but also has support for Powershell and PowerCLI. I was hoping with some tinkering, I could easily get Powershell for Arm to run on PhotonOS (which it did) but I then ran into issues installing PowerCLI itself.

I decided to give up for now and take a look at Ubuntu which also supports Powershell for Arm, but the Microsoft documentation only listed instructions for 32-bit and ESXi-Arm requires a 64-bit. Taking a look at the Powershell release files, I noticed there was 64-bit package and with a few minor adjustments to the commands, I got PowerCLI installed and connected back to my rPI which was attached to my x86 vCenter Server!

[Read more...]