WilliamLam.com

  • About
    • About
    • Privacy
  • VMware Cloud Foundation
  • VKS
  • Homelab
    • Resources
    • Nested Virtualization
  • VMware Nostalgia
  • Apple

USB Native Driver Fling for ESXi adds support for Multi-Gig (1G/2.5G/5G) Adapter

09.27.2019 by William Lam // 10 Comments

Today, we have an exciting update to give on our USB Network Native Driver for ESXi Fling which has had two updates since releasing earlier this year and has been extremely well received by the VMware community. As many of you know, I am always on the look out for new and innovative tech that can help enable our customers, especially when it comes to building home labs to learn about the latest and greatest VMware software.

UPDATE (06/08/20) - QNAP has just published the updated firmware for their QNA-UC5G1T USB NIC which resolves some of the performance issue observed with the initial release.

Several months back, I came to learn about a really cool USB-based Multi-Gigabit Network Adapter (QNA-UC5G1T) from QNAP which can negotiate with speeds up to 1Gbps, 2.5Gbps and 5Gbps. I was not familiar with the multi-gig specification but it it looks like it was created as a standard back in 2016 as IEEE 802.3bz. This initially evolved from advancements in wireless technology but more recently it started to make its way into ethernet-based devices.

Although this particular device is from QNAP, the underlying chipset is actually from Aquantia, now part of Marvell. If the name sounds familiar, it should as Aquantia is also the vendor to Apple for their 10GbE NICs in both the 2018 Mac Mini and new iMac Pros. In fact, their chipsets are also used in a number of Thunderbolt 3 to 10GbE NICs which also works with ESXi. Access to 10GbE is certainly more common these days but it certainly is not for everyone and not all platforms can be expanded to support it.


The QNA-UC5G1T device is not only small but because it is USB-based, you are more likely to have spare USB ports on your system than say a traditional PCIe slot or Thunderbolt 3 port. From a cost standpoint, this device is about half the cost of the 10GbE Thunderbolt adapter coming in at $79 USD and can be ordered from Amazon. As far as I know, QNAP is the only vendor who has produced a multi-gig USB adapter, but perhaps in the future, there will be other vendors.

[Read more...]

Categories // ESXi, Home Lab, Not Supported, vSphere Tags // 2.5GbE, 5GbE, Aquantia, ESXi 6.5, ESXi 6.7, multi-gig, native device driver, QNAP, usb ethernet adapter, usb network adapter

New hardware support & enhancements to USB Network Native Driver for ESXi

06.17.2019 by William Lam // 1 Comment

Since releasing the USB Network Native Driver for ESXi Fling back in February, the feedback and support for this Fling has simply been amazing. I especially enjoy hearing from customers, almost on a weekly basis, on how they are taking advantage of this solution in their vSphere/vSAN/NSX home lab and enabling for more complex networking topologies.

When we released the fling, we had focused on the most popular USB 3.0 network adaptors that we had accessed to which were based on AX8817a, AX88179 & RTL8153 chipsets. The initial list started out with just 5 devices, but we knew there were going to be others. In fact, Songtao and I have received plenty of feedback from our customers on what they would like to see supported, including USB 2.0 network adaptors. Another highly requested feature that customers have been asking for is support for Jumbo Frames and this is usually in the context of setting up either an NSX-V or NSX-T environment.

[Read more...]

Categories // ESXi, Home Lab, Not Supported, vSphere Tags // ESXi 6.5, ESXi 6.7, native device driver, usb ethernet adapter, usb network adapter

ESXi Native Driver for USB NIC Fling

02.12.2019 by William Lam // 35 Comments

Today, I am very excited to announce a new Fling that I have been working on which is a Native Driver for ESXi that will enable support for three of the most popular USB network adapter chipsets found in the market today. The ASIX USB 2.0 gigabit network ASIX88178a, ASIX USB 3.0 gigabit network ASIX88179 & the Realtek USB 3.0 gigabit network RTL8153. This effort had initially started back in 2016 as a side project with Songtao, a VMware Engineer who works on our USB stack for ESXi. Based on the enormous amount of feedback from the community as well customer Production use cases, this side project evolved into the development of a full fledge Native Driver for ESXi.

This Fling is more than just adding additional network interfaces for vSphere Home Labs, which is definitely a use case, but it is also about enabling new and future computing platforms that may not always have the traditional network connectivity that we have come to expect. Today, ESXi supports a number of high-end network controllers (10G/40G/100G) designed for Enterprise Data Centers that include advanced networking & low latency features. As more & more workloads appear at the Edge like IoT, point-of-sales & remote office use cases, the traditional networking solutions may no longer meet the needs of these new infrastructures.

For Edge computing environments, reducing the cost & power consumption is definitely one of the driving factors. However, with some of these platforms, their form factors can make it difficult or impossible to support traditional high-end network controllers. Luckily, there are a number of options for network adapters in the market but is can also be difficult to support them all.

USB has become one the most widely adopted connection type in the world & USB network adapters are also popular amongst Edge computing platforms. In some platforms, there is either limited or no PCI/PCIe slots for I/O expansion & in some cases, an Ethernet port is not even available. This Fling will hopefully help enable some of these Edge use cases today and with the help of the community and feedback, we can see how this can be enhanced or evolved over time including where it could even be part of the ESXi distribution.

Another use case for USB-based network adapters as mentioned earlier are for vSphere Home Labs, platforms like the Intel NUC or Apple Mac Mini have limited number of built-in Ethernet ports, but plenty of USB & USB-C ports which can enable these platforms with additional networking capabilities. These systems could also be potential Edge platform candidates given the right connectivity.

For download and instructions, please visit https://labs.vmware.com/flings/usb-network-native-driver-for-esxi

Categories // ESXi, Home Lab, vSphere Tags // ESXi 6.5, ESXi 6.7, native device driver, usb ethernet adapter, usb network adapter

  • « Previous Page
  • 1
  • 2
  • 3
  • 4
  • 5
  • Next Page »

Search

Thank Author

Author

William is Distinguished Platform Engineering Architect in the VMware Cloud Foundation (VCF) Division at Broadcom. His primary focus is helping customers and partners build, run and operate a modern Private Cloud using the VMware Cloud Foundation (VCF) platform.

Connect

  • Bluesky
  • Email
  • GitHub
  • LinkedIn
  • Mastodon
  • Reddit
  • RSS
  • Twitter
  • Vimeo

Recent

  • Programmatically accessing the Broadcom Compatibility Guide (BCG) 05/06/2025
  • Quick Tip - Validating Broadcom Download Token  05/01/2025
  • Supported chipsets for the USB Network Native Driver for ESXi Fling 04/23/2025
  • vCenter Identity Federation with Authelia 04/16/2025
  • vCenter Server Identity Federation with Kanidm 04/10/2025

Advertisment

Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy

Copyright WilliamLam.com © 2025

 

Loading Comments...