WilliamLam.com

Aquantia/Marvell AQtion (Atlantic) driver now inbox in ESXi 7.0 Update 2

by // 25 Comments

Last spring, VMware and Aquantia (now part of Marvell) collaborated and delivered their first ESXi Native Driver for their AQtion (Atlantic) based 10GbE network adapters. This new driver was primarily focused on enabling network connectivity for ESXi when running on either an Apple 2018 Mac Mini (8,1) and Apple 2019 Mac Pro (7,1) that included the 10GbE networking option. Consequently, this driver also benefited the broader VMware Community as it enabled additional 10GbE networking through a number of Thunderbolt 3 to 10GbE network adapters that customers could now take advantage in their VMware environments.

With all these benefits, VMware has decided to inbox the Aquantia/Marvell driver with the latest ESXi 7.0 Update 2 release, so that customers no longer had to create a custom ESXi Image Profile that included the driver, which was always required when installing ESXi on either the Apple Mac Mini or Mac Pro that were configured with the 10GbE networking option. For a complete list of supported Aquantia/Marvell AQtion based network adapters, please see the VMware HCL.

Here is a screenshot of an earlier release of ESXi 7.0 Update 2 running on the 2018 Mac Mini which now automatically recognizes the 10GbE network adapter out of the box.

ESXi on the new 2019 Apple Mac Pro

by // 85 Comments

Inquiries from customers on the support for ESXi on the latest 2019 Apple Mac Pro 7,1 has slowly been trickling in since the release of the system in late December. Officially, VMware currently does not support this platform and until we have a unit in-house to investigate further, this is the official stance.

With that said, several folks from the community have reached to me and shared some of their findings as it relates to ESXi with the new Mac Pro. A huge thanks goes out to Mike Rimmer who was able to go through the installation process and identified that the on-board NICs were not automatically detected by ESXI and the installation was unable to proceed. With the extensibility of the Mac Pro, Mike was able to add a supported Intel-based NIC to the system so that we could further understand the issue.

Upon closer investigation, it looks like the new Mac Pro uses two Aquantia based 10GbE NIC which is simliar to the 2018 Mac Mini which requires the Aquantia ESXi driver which was developed earlier last year.

AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion]
Vendor ID: 0x1d6a
Device ID: 0x07b1

Although Mike did not have a chance to confirm this assumption, I did get validation from another customer who made the same observation when he attempted to install ESXi and once the Aquantia ESXi driver was incorporated into the latest ESXi 6.7 Update 3 image, both on-board NICs were automatically picked up by ESXi and installation was successful.

UPDATE (09/02/21) - Per this official blog post, VMware will no longer pursue hardware certification for the Apple 2019 Mac Pro 7,1 for ESXi.

UPDATE (04/28/20) - ESXi 6.7 Patch 02 resolves a number of the issues mentioned below, please take a look at this blog post here for more details.

UPDATE 1 (01/16/19) - Thanks to our Graphics team who was kind enough to loan me their 2019 Mac Pro which literally came in yesterday! I had an idea which I wanted to run an experiment on which was to add a PCIe card w/M.2 NVMe SSD and see whether or not the Apple T2 Security Chip would have any affect on whether or not ESXi would be able to see the device. I was not super optimistic but I had a need for an additional M.2 device, so I went ahead and purchased a $15 PCIe adaptor. I was pleasantly surprise to see that ESXi not only detected the device but I was able to format a local VMFS volume and power up a functional VM! I guess this makes sense as only the Apple SSD's are cryptographically tied to the T2 chip and other PCIe devices would not be and this would allow customers to take advantage of this system right now for running non-MacOS guests (yes, T2 still affects the SMC).

I also ran another experiment by connecting a Thunderbolt 3 chassis which also had a supported M.2 NVMe to see if I was going to be lucky again. Although it looks like ESXi 6.7 Update 3 has resolved the PSOD'ing issue, ESXi was not able to see anything on the other end.

Note: Secure Boot must be disabled on the Mac Pro before you can install ESXi, you can find the instructions in this Apple KB.


This was certainly some good news but like the 2018 Mac Mini, the new 2019 Mac Pro also ships with the Apple T2 Security Chip which has proved challenging for ESXi as mentioned here along with some known caveats. For now, I would hold off making any purchases of the new Mac Pro if you intend to run ESXi. VMware does officially support ESXi on the last current generation of Mac Pro 6,1 along with Mac Mini 6,2 and Mac Mini 7,1 which are all on the official VMware HCL.

I will continue to update this article as new information and findings are shared with me.

USB Native Driver Fling for ESXi adds support for Multi-Gig (1G/2.5G/5G) Adapter

by // 10 Comments

Today, we have an exciting update to give on our USB Network Native Driver for ESXi Fling which has had two updates since releasing earlier this year and has been extremely well received by the VMware community. As many of you know, I am always on the look out for new and innovative tech that can help enable our customers, especially when it comes to building home labs to learn about the latest and greatest VMware software.

UPDATE (06/08/20) - QNAP has just published the updated firmware for their QNA-UC5G1T USB NIC which resolves some of the performance issue observed with the initial release.

Several months back, I came to learn about a really cool USB-based Multi-Gigabit Network Adapter (QNA-UC5G1T) from QNAP which can negotiate with speeds up to 1Gbps, 2.5Gbps and 5Gbps. I was not familiar with the multi-gig specification but it it looks like it was created as a standard back in 2016 as IEEE 802.3bz. This initially evolved from advancements in wireless technology but more recently it started to make its way into ethernet-based devices.

Although this particular device is from QNAP, the underlying chipset is actually from Aquantia, now part of Marvell. If the name sounds familiar, it should as Aquantia is also the vendor to Apple for their 10GbE NICs in both the 2018 Mac Mini and new iMac Pros. In fact, their chipsets are also used in a number of Thunderbolt 3 to 10GbE NICs which also works with ESXi. Access to 10GbE is certainly more common these days but it certainly is not for everyone and not all platforms can be expanded to support it.


The QNA-UC5G1T device is not only small but because it is USB-based, you are more likely to have spare USB ports on your system than say a traditional PCIe slot or Thunderbolt 3 port. From a cost standpoint, this device is about half the cost of the 10GbE Thunderbolt adapter coming in at $79 USD and can be ordered from Amazon. As far as I know, QNAP is the only vendor who has produced a multi-gig USB adapter, but perhaps in the future, there will be other vendors.

[Read more...]