WilliamLam.com

Aquantia/Marvell AQtion (Atlantic) driver now inbox in ESXi 7.0 Update 2

by // 15 Comments

Last spring, VMware and Aquantia (now part of Marvell) collaborated and delivered their first ESXi Native Driver for their AQtion (Atlantic) based 10GbE network adapters. This new driver was primarily focused on enabling network connectivity for ESXi when running on either an Apple 2018 Mac Mini (8,1) and Apple 2019 Mac Pro (7,1) that included the 10GbE networking option. Consequently, this driver also benefited the broader VMware Community as it enabled additional 10GbE networking through a number of Thunderbolt 3 to 10GbE network adapters that customers could now take advantage in their VMware environments.

With all these benefits, VMware has decided to inbox the Aquantia/Marvell driver with the latest ESXi 7.0 Update 2 release, so that customers no longer had to create a custom ESXi Image Profile that included the driver, which was always required when installing ESXi on either the Apple Mac Mini or Mac Pro that were configured with the 10GbE networking option. For a complete list of supported Aquantia/Marvell AQtion based network adapters, please see the VMware HCL.

Here is a screenshot of an earlier release of ESXi 7.0 Update 2 running on the 2018 Mac Mini which now automatically recognizes the 10GbE network adapter out of the box.

Apple NVMe driver for ESXi using new Community NVMe Driver for ESXi Fling 

by // 60 Comments

VMware has been making steady progress on enabling both the Apple 2018 Mac Mini 8,1 and the Apple 2019 Mac Pro 7,1 for our customers over the past couple of years. These enablement efforts have had its challenges, including the lack of direct hardware access for our developers and supporting teams due to the global pandemic but also the lack of participation from Apple has certainly not made this easier.

Today, I am happy to share that we have made some progress on enabling ESXi to see and consume the local Apple NVMe storage device found in the recent Apple T2-based mac systems such as the 2018 Mac Mini and 2019 Mac Pro. There were a number of technical challenges the team had to overcome, especially since the Apple NVMe was not just a consumer grade device but it also did not follow the standard NVMe specification that you normally would see in most typical NVMe devices.

This meant there was a lot of poking and prodding to reverse engineer the behavior of the Apple NVMe to better understand how this device works, which often leads to sudden reboot or PSODs. With the Apple NVMe being a consumer device, it also meant there were a number of workarounds that the team had to come up with to enable ESXi to consume the device. The implementation is not perfect, for example we do not have native 4kn support for SSD devices within ESXi and we had to fake/emulate a non-SSD flag to work around some of the issues. From our limited testing, we have also not observed any significant impact to workloads when utilizing this driver and we also had had several internal VMware teams who have already been using this driver for a couple of months now without reporting any issues.

A huge thanks goes out to Wenchao and Yibo from the VMkernel I/O team who developed the initial prototype which has now been incorporated into the new Community NVMe Driver for ESXi Fling.

Caveats

Before folks rush out to grab and install the driver, it is important to be aware of a couple of constraints that we have not been able to work around yet.

  1. ESXi versions newer then ESXi 6.7 Patch 03 (Build 16713306) is currently NOT supported and will cause ESXi to PSOD during boot up.
  2. The onboard Thunderbolt 3 ports does NOT function when using the Community NVMe driver and can cause ESXi to PSOD if activated.

Note: For detailed ESXi version and build numbers, please refer to VMware KB 2143832

VMware Engineering has not been able to pin point why the ESXi PSOD is happening. For now, this is a constraint to be aware of which may impact anyone who requires the use of the Thunderbolt 3 ports for additional networking or storage connectivity.

With that out of the way, customers can either incorporate the Community NVMe Driver for ESXi offline bundle into a new ESXi Image Profile (using vSphere Image Builder UI/CLI) and then exporting image as an ISO and then installing that on either a Mac Mini or Mac Pro or you can manually install the offline bundle after ESXi has been installed over USB and upon reboot, the local Apple NVME will then be visible for VMFS formatting.

Here is a screenshot of ESXi 6.7 Patch 03 installed on my 2018 Mac Mini with the Apple NVMe formatted with VMFS and running macOS VM

GPU passthrough with ESXi on the Apple 2019 Mac Pro 7,1

by // 15 Comments

The expandability of the Apple 2019 Mac Pro (7,1) has been the primary reason VMware customers have been so excited for this new platform for virtualizing macOS on ESXi. The most common request that I hear from customers is for GPU passthrough.

Although VMware does not officially support GPU passthrough, even for the existing Apple hardware systems on the VMware HCL, this has been a topic I have been keeping an eye out on, especially from what the VMware community is doing in this space.

My intention for this blog post is to provide a resource for the community on capturing the success and failures when attempting GPU passthrough on a 2019 Mac Pro. For those interested and have capable hardware, you may want to start with the VMware HCL for GPU passthrough devices listed under Virtual Dedicated Graphics Acceleration (vDGA). This may be your best chance to successfully passthrough a GPU that will be recognized by either a macOS or Linux/Windows guest operating system.

If you would like to share your experiences, feel free to leave a comment or reach out by filling the contact form.

Disclaimer: Although ESXi installs and runs on the Apple 2019 Mac Pro 7,1 it is currently not certified on the VMware HCL. There are no timelines on the certification due to challenges with COVID-19.

[Read more...]