WilliamLam.com

vSphere 6.7 Update 2 add support back for Apple Mac Pro 6,1

by // Leave a Comment

Last fall, support for vSphere 6.7 Update 1 on the Apple Mac Pro 6,1 was removed by VMware after finding out an updated version of the Apple Firmware prevented ESXi from booting up properly after upgrading. After some investigation and troubleshooting with several customers, VMware Engineering found a solution to workaround the problem and that fix is included in the latest vSphere 6.7 Update 2 release. As mentioned in the original blog post, this could also impact Apple Mac Mini's, which are not officially supported by VMware, but the fix should also apply to the Mac Mini.

In addition, the VMware HCL will also be updated shortly to reflect support for both vSphere 6.7 Update 2 along with the existing vSphere 6.7 support. For customers that have been waiting for features in vSphere 6.7 Update 1, you can finally upgrade to the latest release to get all the new features and benefits of vSphere.

Retrieving Apple hardware details (Model, Serial, Board & EFI Boot ROM & SMC Version) from ESXi

by // 3 Comments

For customers who run ESXi on Apple Hardware, retrieving the Apple hardware specific information such as the Board ID, EFI Boot Room and SMC Version for troubleshooting or auditing purposes can be challenging. Historically, this information is only available when running the hardware with an Apple MacOS operating system and customers would have to either boot the system into the MacOS Recovery Mode to run the system profiler tool from the command-line or install a full blown MacOS operating system to retrieve the necessary information as outlined in this Apple KB.

For some customers, this may not even be an option as Apple hardware does not provide any remote management capabilities and customers must physically be in front of the system to perform this process and imagine needing to do this across a fleet of Apple servers. 

While working on a recent case with a customer, I was curious if the Apple specific information could be retrieved from within ESXi and remove the need to boot into MacOS? I reached out to one of the Engineers, Darius Davis, who I work with on a frequent basis when it comes to MacOS-related topics to see if this was possible.

[Read more...]

Thunderbolt to 10GbE Network Adapters for ESXi

by // 5 Comments

I was recently made aware of this article in which the author, Karim Elatov, had successfully demonstrated the use of a Sonnett Thunderbolt 2 to 10 Gigabit Ethernet Adapter with ESXi running on an Apple Mac Mini. As far as I am aware of, this may be the first public confirmation that such a device would work with ESXi, not to mention having it functional on the Mac Mini. I know in past years, there have been unconfirmed reports on various forums mentioning a Thunderbolt to 10GbE solution that works with ESXi but it was unclear on whether custom drivers were needed or if it would even work with newer versions of ESXi.


This topic has been popular amongst our customers who virtualize Apple MacOS on vSphere. In fact, several years back I had written an article on Thunderbolt Storage for ESXi, which includes a number of solutions that our customers have implemented to provide remote storage for their vSphere infrastructure running on either an Apple XServe, Mac Pro or Mac Mini. Questions around a functional Thunderbolt to 10GbE has definitely been asked about, but I had never heard from any customer who have had a successful story to share, at least until now.

From Karim's post, it looks like he was able to get this working using ESXi 6.0 but it was unclear if there was anything he needed to do to get the device recognized. I reached out to Karim and he was able to confirm that the Thunderbolt device was recognized by ESXi without any additional driver installation. In fact, if you look at this console output on his blog, you will see that it simply uses the inbox Intel ixgbe driver. I had also asked if Karim tried this with the latest version of ESXi, which is currently at 6.5 Update 1. Karim was kind enough to perform one additional test for me which was to confirm the device would still work with the latest ESXi release, which you can see for yourself in the screenshot below.

UPDATE (02/04/19) - Chad Moon recently shared his experiences on getting 10GbE support with an Intel NUC using the OWC Mercury Helios 3, Thunderbolt3 to PCIe expansion enclosure

[Read more...]