WilliamLam.com

New Thunderbolt 3 to 10GbE options for ESXi

by // 78 Comments

With the help from Aquantia, we now have an ESXi driver to enable the built-in 10GbE adaptor for both the Apple 2018 Mac Mini and the iMac Pro. Although this was exciting news for our VMware/Apple customers, I was actually more excited for what this development meant for the larger VMware Community when it comes to 10GbE accessibility.

Many Enterprise customers have already been using Thunderbolt 2/3 to access their 10 Gigabit infrastructure, usually over SFP+ but Ethernet based options also exists such as the Sonnet solution which I had shared last year. This is especially common for VMware customers who virtualize Apple MacOS on vSphere for MacOS/iOS development and the use of Thunderbolt enables ESXi to connect to the underlying storage and networking infrastructure, which traditionally has been either Fibre Channel and/or IP-based storage running over a 10Gig link.

When you start looking at 10GbE accessibility for VMware home labs which could potentially apply to remote office/branch office (ROBO) and Edge/IoT environments, the cost and the complexity of the setup is something that many folks have to consider. There are definitely some creative options out there, most recently Chad Moon shared his solution using a Thunderbolt 3 to PCIe expansion chassis with his Intel NUCs which will run you about $230 per setup or you can be a true hardware hacker like Jack Harvest and use one of the M.2 slots in the Intel Skull Canyon NUC and connect that to PCIe 10GbE SFP+ card with a custom 3D printed chassis to hide everything for just $43.68 🙂

[Read more...]

Aquantia 10GbE ESXi Driver for Apple 2018 Mac Mini

by // 30 Comments

I know many of you have been anxiously waiting for ESXi to be fully functional on the latest Apple Mac Mini (2018), unfortunately I do not have any news to share with you on that front. Without help from Apple, we are still challenged with Apple's new T2 chip, which prevents us from accessing the underlying NVMe device.

UPDATE (04/27/20) - Marvell (formally Aquantia) has just released an official Native ESXi Driver for their AQtion based network adaptors which you can find here and for the complete list of supported devices using this driver, please refer to the VMware HCL here.

Having said that, I do have some exciting news regarding the built-in 10Gigabit Ethernet adaptor on the 2018 Mac Mini. The 10GbE adaptor uses an Aquantia chipset, this is also the same chipset used in Apple's high end iMac Pro which was released earlier in the year. Over the past few weeks, I have been working with the Aquantia team and they have successfully ported over their open source Atlantic driver to a VMKlinux driver for ESXi, which they have published here. Although the local NVMe device can not be used to run any VMs, with the network fully enabled, customers could take advantage of this model and connect to IP-based storage to start leveraging the new Mac Mini platform.

The easiest way to incorporate the driver into the latest ESXi release is to use Image Builder within the vSphere H5 Client UI, below are the step-by-step instructions.

[Read more...]

Thunderbolt to 10GbE Network Adapters for ESXi

by // 5 Comments

I was recently made aware of this article in which the author, Karim Elatov, had successfully demonstrated the use of a Sonnett Thunderbolt 2 to 10 Gigabit Ethernet Adapter with ESXi running on an Apple Mac Mini. As far as I am aware of, this may be the first public confirmation that such a device would work with ESXi, not to mention having it functional on the Mac Mini. I know in past years, there have been unconfirmed reports on various forums mentioning a Thunderbolt to 10GbE solution that works with ESXi but it was unclear on whether custom drivers were needed or if it would even work with newer versions of ESXi.


This topic has been popular amongst our customers who virtualize Apple MacOS on vSphere. In fact, several years back I had written an article on Thunderbolt Storage for ESXi, which includes a number of solutions that our customers have implemented to provide remote storage for their vSphere infrastructure running on either an Apple XServe, Mac Pro or Mac Mini. Questions around a functional Thunderbolt to 10GbE has definitely been asked about, but I had never heard from any customer who have had a successful story to share, at least until now.

From Karim's post, it looks like he was able to get this working using ESXi 6.0 but it was unclear if there was anything he needed to do to get the device recognized. I reached out to Karim and he was able to confirm that the Thunderbolt device was recognized by ESXi without any additional driver installation. In fact, if you look at this console output on his blog, you will see that it simply uses the inbox Intel ixgbe driver. I had also asked if Karim tried this with the latest version of ESXi, which is currently at 6.5 Update 1. Karim was kind enough to perform one additional test for me which was to confirm the device would still work with the latest ESXi release, which you can see for yourself in the screenshot below.

UPDATE (02/04/19) - Chad Moon recently shared his experiences on getting 10GbE support with an Intel NUC using the OWC Mercury Helios 3, Thunderbolt3 to PCIe expansion enclosure

[Read more...]