WilliamLam.com

ESXi Thunderbolt Driver to Fibre Channel Storage from ATTO

by // 6 Comments

esxi-thunderbolt-driver-atto
One of the things I always enjoy doing at VMworld, when I am not running around and I have a few minutes to myself, is to check out the VMware Solutions Exchange. This is where you can learn and interact with hundreds of our VMware Certified Partners showcasing their new solutions and innovations that they have built on top of VMware's products.

UPDATE (08/22/17) - ATTO's ESXi Thunderbolt Driver is now officially on the VMware HCL, please see this blog post here for more details.

While walking through the show floor, I had stopped by the ATTO Technology booth who has been a long time partner of VMware in the storage and networking connectivity space. What caught my eye was that they had just released a Beta of an ESXi Thunderbolt Driver in the form of an ESXi VIB that would allow customers to connect their Apple Mac Pro 6,1 using the Thunderbolt 2 interface to an external Fibre Channel storage array. I believe ATTO might be the first vendor ever to produce a Thunderbolt Driver for ESXi. This is really exciting news if you ask me, especially as more and more of our customers are looking to virtualize Mac OS X guests in their Datacenters using vSphere. 

Historically, the only option to connect a Mac Pro 6,1 to an external Fibre Channel array was to use something like a Sonnet Chassis. Now, you can potentially connect up to 6 of the built-in Thunderbolt 2 interfaces on the Mac Pro's to your external storage array using this new solution from ATTO. Before I go into some of the details, ATTO did want me to mention that this solution is currently not officially supported by VMware nor is it on VMware's HCL. ATTO will be providing full support on their software as well as VMware's software stack during the duration of the beta program. In terms of official certification on VMware's HCL, I suspect that it will most likely depend on customer demand which would influence whether ATTO applies for an official certification, which again, would be the first of its kind for Thunderbolt.

The way in which this solution works is that you install the ATTO Thunderbolt Driver on your ESXi host and this will allow it to communicate with an ATTO ThunderLink device which provides the Thunderbolt 2 to Fibre Channel connectivity. You have the option of using either the FC2082 which provides 20Gb/s Thunderbolt 2 (2-port) to 8Gb/s FC (2-Port) Device or the FC2182 which provides 20Gb/s Thunderbolt 2 (2-port) to 16Gb/s FC (2-Port) Device. Below is a diagram from the ATTO digital solution brief on Thunderbolt Driver for ESXi which outlines the configuration.

esxi-thunderbolt-driver-atto-1
If you are interested in taking part in ATTO's ESXi Thunderbolt Driver Beta program or would like to learn more about the solution, you can reach out directly to Carllene Mowry (*protected email*) who is running the program. For more information be sure to check out the ATTO digital brief on Thunderbolt Driver for ESXi.

Lastly, I was also fortunate to have a quick chat with Carllene and team to get a few additional exclusive tidbits on some of the things the ATTO team is working on next. The first of which is support for the Thunderbolt 3 (aka USB-C) interface to Fibre Channel which will be quite nice for newer platforms that include that interface, including home lab setups such as the Intel NUC. Speaking of Intel NUC, this is just one of the many other platforms that include either Thunderbolt 2 or 3 interfaces. Although the solution today is specifically supporting the Mac Pro, I know ATTO folks are interested to hear from customers on other systems with Thunderbolt interface and providing similiar capabilities.

The other really exciting development that is currently being investigated is support for Thunderbolt 2 or 3 to 10GbE connectivity on ESXi. As you can imagine, this is really going to open up some really cool new use cases, especially around things like VSAN which can easily benefit from this. It is still in early development but from my understanding, ATTO is already seeing a lot of interest in this area as well as how this might work with VSAN. I am hoping I will be able to share more details as this further develops. If any of these updates sounds interesting, do leave a comment to let the ATTO folks know and I will make sure they monitor the thread.

Apple Mac Pro 6,1 PCIe SSD issue resolved w/ESXi 6.0 Update 2

by // 6 Comments

Early last year, the new Apple Mac Pro 6,1 (aka black can design) was certified and fully supported on vSphere 6.0 which I had blogged about here. Several months later, customers discovered that some of the newer Mac Pro 6,1 units were shipping with different model of their PCIe SSD device than what was originally released at GA. This was problematic because ESXi was not aware of this newer device and could not detect during or after installation. Although a work around was identified for customers looking to install either ESXi 5.x or 6.x on the newer Apple Mac Pros, it definitely was not ideal.

It has taken a bit longer than expected, but the issue has now been resolved with the latest release of ESXi 6.0 Update 2. A similar fix will be available for customers running ESXi 5.5 in a future update. You can find the direct download for ESXi 6.0 Update 2 in link below which includes a pointer to the release notes in case you are interested in other fixes included in this release.

Heads up: ESXi 5.x & 6.0 unable to detect newer Apple Mac Pro 6,1 local SSD Device

by // 12 Comments

Over the last couple of weeks there have been several reports coming in from customers that the local SSD device found in newer Apple Mac Pro 6,1 were no longer being detected by ESXi. Starting with ESXi 5.5 Patch03 and ESXi 6.0, the Apple Mac Pro 6,1 was officially supported but it looks like the latest versions of the Mac Pro 6,1 that are being shipped contain  a slightly different local SSD device which is not recognized by ESXi.

This was not the first time that this has happened, when the 2014 Mac Mini were first released, they too had a similar issue in which a custom VIB was required to get the internal device to get recognized by ESXi. There is an internal bug (PR 1487494) that is currently tracking the issue and if you are also experiencing this problem, please file an SR and have the GSS Engineer attach your case to this bug.

In the meantime, there is an unofficial workaround which was discovered by one of my readers (Mr. Spock) that by installing the community SATA-XACHI VIB over on Andreas Peetz VIB Depot site, both ESXi 5.5 and ESXi 6.0 will then recognize the local SSD Device. You will need to either use VMware Image Builder or Andreas ESXi Customizer tool to create a custom image if you decide to install ESXi directly on the local SSD device. I personally would recommend installing ESXi on USB device, this would allow you to install the VIB as a post-installation and not requiring a custom ESXi image.