WilliamLam.com

  • About
    • About
    • Privacy
  • VMware Cloud Foundation
  • VKS
  • Homelab
    • Resources
    • Nested Virtualization
  • VMware Nostalgia
  • Apple

The Missing Piece In Creating Your Own Ghetto vSEL Cloud

10.31.2011 by William Lam // 21 Comments

Awhile back I discovered an undocumented flag called "esxvm" in the SQL statements of the new vCloud Director 1.5 installer that suggested the possibility of deploying nested ESXi hosts in vCD. However, after further investigation the flag only enables the automated deployment of an ESXi 5 parameter (vhv.allow) which is required to run nested ESXi 4.x/5.x hosts as part of preparing a new ESXi 5 hosts in vCloud Director. There was still a missing piece to the puzzle to enable this functionality within vCloud Director user interface.

The answer eventually came from attending a recent session at VMworld 2011 in Las Vegas CIM1436 - Virtual SE Lab (vSEL) Building the VMware Hybrid Cloud by Ford Donald of VMware. I will not go into detail about what vSEL is, if you would like more information take a look at this blog post The Demo Cloud at VMworld Copenhagen or check out Ford's VMworld presentation online. In one of Ford's slides, he describes the necessary steps to enable nested ESXi called ESX_VM mode in vCloud Director which actually consists of two parts:

  • Enable nested virtualization and 64-bit vVM support in vSphere 5
  • Enable special mode in vCloud Director called ESX_VM to allow for vSphere 4 and 5 hosts as valid guestOS types

There are also some additional steps that are required after enabling ESX_VM mode:

  • Preparing or re-preparing ESXi 5 hosts
  • Allowing for Promiscuous Mode in vCD-NI or VLAN-backed Network Pool

********************* DISCLAIMER *********************
This is not a supported configuration by VMware and this can disappear at any time, use at your own riskĀ 

********************* DISCLAIMER *********************

Note: I will assume the reader has a good understanding of how to install/configure vCloud Director and how it works. I will not be going into any details in configuring or installing vCD, you can find plenty of resources on the web including here, here, here and here. I will also assume you understand how to configure vCD-NI and VLAN-backed network pools in vCloud Director and how they work.

The first part is to enable nested virtualization (nested ESXi) support within the ESXi 5 hosts when they're being prepared by vCloud Director by updating the following SQL statement as noted in my earlier blog post Cool Undocumented Features in vCloud Director 1.5:

UPDATE config SET value='true' WHERE name='extension.esxvm.enabled';

The second part is to update the vCloud Director database to add support for both vSphere 4 and 5 hosts as valid guestOS types:

INSERT INTO guest_osfamily (family,family_id) VALUES ('VMware ESX/ESXi',6);

INSERT INTO guest_os_type (guestos_id,display_name, internal_name, family_id, is_supported, is_64bit, min_disk_gb, min_memory_mb, min_hw_version, supports_cpu_hotadd, supports_mem_hotadd, diskadapter_id, max_cpu_supported, is_personalization_enabled, is_personalization_auto, is_sysprep_supported, is_sysprep_os_packaged, cim_id, cim_version) VALUES (seq_config.NextVal,'ESXi 4.x', 'vmkernelGuest', 6, 1, 1, 8, 3072, 7,1, 1, 4, 8, 0, 0, 0, 0, 107, 40);

INSERT INTO guest_os_type (guestos_id,display_name, internal_name, family_id, is_supported, is_64bit, min_disk_gb, min_memory_mb, min_hw_version, supports_cpu_hotadd, supports_mem_hotadd, diskadapter_id, max_cpu_supported, is_personalization_enabled, is_personalization_auto, is_sysprep_supported, is_sysprep_os_packaged, cim_id, cim_version) VALUES (seq_config.NextVal, 'ESXi 5.x', 'vmkernel5Guest', 6, 1, 1, 8, 3072, 7,1, 1, 4, 8, 0, 0, 0, 0, 107, 50);

To apply these SQL statements to your vCloud Director 1.5 database, you will need to login to either to your Oracle or SQL Server database and manually execute these statements using the account that you originally created.

Here is an example of executing the SQL statements on an Oracle Express 11g database (Oracle Express is not officially supported by VMware):

As you can see, we need we first create a new guest_osfamily type called "VMware ESX/ESXi" and we need to also provide a unique family_id, which from a default installation of vCloud Director 1.5, the next available value will be 6. Next, we need to create the two new guestos_type "ESXi 4.x" and "ESXi 5.x" and again we need to provide a unique guestos_id which from a default installation of vCloud Director 1.5, the next available values will be 81 and 82. If any errors are thrown regarding a constraint being violated, then the ids may already have been used, you can always query to see what the next value is or select a new id.

Once you have executed the SQL statements, you will need to restart the vCloud Director Cell for the changes to take effect and if you already have prepared ESXi 5 hosts, you will need to re-prepare the hosts.

If you prefer not to manually do this, you can take a look at my blog post Automating vCloud Director 1.5 & Oracle DB Installation which has been updated to allow you to enable ESX_VM mode with your vCloud Director 1.5 installation. There is a new flag in the vcd.rsp file called ENABLE_NESTED_ESX which can be toggled to true/false which will automatically perform the SQL statements as part of the post-installation of vCloud Director 1.5 and restart the vCD Cell for you.

Here is a screenshot if you decide to enable this flag:

Finally, the last configuration tweak is to enable both promiscuous mode and forged transmit in either your vCD-NI or VLAN-backed Network Pool which is a requirement to run nested ESXi hosts. You locate the name of your network pool to identify distributed portgroup.

Next you can either use the vCD API or login to your vCenter Server and enable the promiscuous mode for that specific distributed portgroup.

UPDATE: Thanks to @DasNing - You can also enable promiscuous mode by executing the following SQL query: UPDATE network_pool SET promiscuous_mode='1' WHERE name=';

We are finally done with all the configurations!

If you successfully completed the above, when you go and create a new virtual machine in vCloud Director, you should now have a new Operation System Family called "VMware ESX/ESXi"

Within this new OS family, you can now provision a new ESXi 4.x or ESXi 5.x guestOS

Here is an example of my own vGhettoPod which includes vMA5 and vESXi 5 host which I can use to perform various types of testing in my home lab.

Now you can create your own ghetto vSEL cloud using VMware vSphere 5, vCloud Director 1.5 and vShield 5!

Categories // Automation, ESXi, Nested Virtualization, Not Supported, Uncategorized Tags // ESXi 5.0, esxvm, nested, vcd, vcloud director, vsel, vSphere 5.0

Search

Thank Author

Author

William is Distinguished Platform Engineering Architect in the VMware Cloud Foundation (VCF) Division at Broadcom. His primary focus is helping customers and partners build, run and operate a modern Private Cloud using the VMware Cloud Foundation (VCF) platform.

Connect

  • Bluesky
  • Email
  • GitHub
  • LinkedIn
  • Mastodon
  • Reddit
  • RSS
  • Twitter
  • Vimeo

Recent

  • Programmatically accessing the Broadcom Compatibility Guide (BCG) 05/06/2025
  • Quick Tip - Validating Broadcom Download TokenĀ  05/01/2025
  • Supported chipsets for the USB Network Native Driver for ESXi Fling 04/23/2025
  • vCenter Identity Federation with Authelia 04/16/2025
  • vCenter Server Identity Federation with Kanidm 04/10/2025

Advertisment

Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy

Copyright WilliamLam.com © 2025