WilliamLam.com

Simplified Nested ESXi installation in ESXi 7.0 Update 2 using HTTP Boot over VirtualEFI

by // 19 Comments

Deploying an ESXi scripted installation aka Kickstart running within a VM (Nested ESXi) has a number of benefits, especially for testing and development purposes. This was something I did regularly as a customer, especially with new releases of ESXi to ensure our existing automation scripts and processes continued to work before rolling out into production. ESXi kickstart itself is pretty straight forward, but the required supporting infrastructure (PXE Server, DHCP, TFTP, etc) that needs to be configured, especially for a greenfield deployment can often be challenging for new comers.

Even with an existing PXE infrastructure, it can often be difficult to configure or troubleshoot depending on your level of access which does not add any value in actually testing or automating the ESXi scripted installation process. In ESXi 7.0 Update 2, an enhancement was made to the Virtual Machine's UEFI firmware called VirtualEFI that would enable ESXi to perform an HTTP Boot given the ESXi bootloader URL and without requiring any of the traditional PXE infrastructure.

To take advantage of this new capability, you just need to have a physical server running ESXi 7.0 Update 2 and a VM that is configured with the latest vHW19 compatibility. To configure HTTP boot, you will need to add the following two VM Advanced Settings:

  • networkBootProtocol - httpv4 or httpv6
  • networkBootUri - HTTP URL to the ESXi bootloader (bootx64.efi)

Disclaimer: Nested ESXi and Nested Virtualization is not officially supported by VMware

[Read more...]

ESXi 7.0 Update 2 enhancement for USB NIC only installations

by // 11 Comments

The USB Network Native Driver for ESXi Fling has been an extremely popular Fling that has allowed customers to easily add additional networking capabilities by using a supported USB-based network adapter even though ESXi traffic over USB networking is not officially supported.

In most deployments, the USB network adapter is usually a supplement to the existing onboard network adapter of a system. However, there have been scenarios where the onboard network adapter is either not available or functional and customers would still like to be able to install ESXi and have it running over just the USB network adapter.

Although installing ESXi using just a USB network adapter is possible today, one downside is that an additional workflow is needed to fix the network binding after installing ESXi.

During the interactive ESXi installation, you will see the following error at 81% which will cause installer to get stuck

Exception: No vmknic tagged for management was found.

At this point, the installer has completed and you need to switch to the console (Alt+F1) and just perform a reboot to actually complete the installation.


After ESXi boots up for the first time after the install, you will need to go into the DCUI and manually bind the vusb0 interface for ESXi management for connectivity. To persist this USB NIC binding, you will need to add small snippet of code as outlined here.

Obviously, this was not an ideal user experience and I personally had to use this workaround on several occasions, especially for newer hardware platforms where the onboard network adapter may not be recognized by ESXi and being able to use the USB Network Fling definitely came in handy.

With the release of ESXi 7.0 Update 2, we have improved the user experience for installing ESXi with just a single USB NIC. This enhancement was added by Songtao after mentioning the undesirable behavior. A new driver parameter called usbBusFullScanOnBootEnabled has been introduced and can added after the initial installation which removes the need for the workaround mentioned above by editing the local.sh file. This new parameter instructs ESXi to perform a full bus scan to claim all USB NICs that are attached since USB device claiming is slow compared to PCIe devices.

[Read more...]

Aquantia/Marvell AQtion (Atlantic) driver now inbox in ESXi 7.0 Update 2

by // 15 Comments

Last spring, VMware and Aquantia (now part of Marvell) collaborated and delivered their first ESXi Native Driver for their AQtion (Atlantic) based 10GbE network adapters. This new driver was primarily focused on enabling network connectivity for ESXi when running on either an Apple 2018 Mac Mini (8,1) and Apple 2019 Mac Pro (7,1) that included the 10GbE networking option. Consequently, this driver also benefited the broader VMware Community as it enabled additional 10GbE networking through a number of Thunderbolt 3 to 10GbE network adapters that customers could now take advantage in their VMware environments.

With all these benefits, VMware has decided to inbox the Aquantia/Marvell driver with the latest ESXi 7.0 Update 2 release, so that customers no longer had to create a custom ESXi Image Profile that included the driver, which was always required when installing ESXi on either the Apple Mac Mini or Mac Pro that were configured with the 10GbE networking option. For a complete list of supported Aquantia/Marvell AQtion based network adapters, please see the VMware HCL.

Here is a screenshot of an earlier release of ESXi 7.0 Update 2 running on the 2018 Mac Mini which now automatically recognizes the 10GbE network adapter out of the box.