Apple – Page 19

How to install ESXi 5.5 Patch03 on the new Mac Pro 6,1?

10.31.2014 by William Lam // 23 Comments

I have received several questions from customers asking how to go about installing the latest ESXi 5.5 Update 2 Patch03 on the Apple Mac Pro 6,1. Luckily, I was able to borrow one of the Apple Mac Pro 6,1 we had within VMware Engineering for a couple of days to document the process.

Step 1 - A prerequisite that must be met prior to installing ESXi is to have the Apple boot ROM update on the Mac Pro 6,1 running on MP61.0116.B05 or higher. This great piece of tidbit came from Josh who discovered issues while trying to install ESXi and found out this was a requirement after opening a case with Apple Engineering. It turns out that there is not an EFI update and the ONLY way to update the boot ROM was to install Yosemite (OS X 10.10) as it contains an update which can be applied to the Mac Pro. Thanks Josh for sharing this tip with us!

You can check the boot ROM by either following this Apple KB here or by running system info with an OS X image on a bootable USB device which is what I did to verify as seen in the screenshot below.

Step 2 - Once you have met the prerequisite, you will need to download the offline bundle for ESXi 5.5 Update 2 Patch03 which contains the Mac Pro 6,1 enablement along with other bug fixes. You can do so by going to VMware Patche portal and under ESXi, you should find ESXi550-201410001.zip at the very top.

Step 3 - Next you need to convert this offline bundle into an ISO image that you can load onto a USB device, this is the simplest way to install ESXi. To do so, you will need a Windows system as it uses a tool called VMware Image Builder which is only available for Windows. Image Builder is part of the PowerCLI toolkit which can be downloaded here.

Step 4 - Once PowerCLI has been installed go ahead and launch the it and we are ready to start authoring our ISO image

Step 5 - Add ESXi offline bundle that we download by running the following command:

Add-EsxSoftwareDepot ESXi550-201410001.zip

Step 6 - You will need to select the particular ESXi Image Profile to create your ISO image from, you can view the four Image Profiles by running the following command:

Get-EsxImageProfile | format-wide

Step 7 - You will want to select the one that contains the all patches including security and VMware Tools called ESXi-5.5.0-20141004001-standard by running the following command:

New-EsxImageProfile -CloneProfile "ESXi-5.5.0-20141004001-standard" -name "ESXi55u2-p03" -Vendor virtuallyGhetto

Step 8 - We now need to export the Image Profile we have selected to an ISO by running the following command:

Export-EsxImageProfile -ImageProfile "ESXi55u2-p03" -ExportToISO -filepath C:\VMware-ESXi-5.5u2p03-Mac-Pro-6-1.iso

Step 9 - Once the ISO has been created, you can now create a bootable USB containing your ESXi installation. I like to use Unetbootin but there are several other tools you can use, select whichever one you are comfortable with.

Step 10 - Plug the USB device into your Mac Pro and make sure to hold down the "ALT" key so you can select the device to boot from and you can start your ESXi installation as you would normally.

Here is a screenshot of the Mac Pro running the latest ESXi 5.5 Update 2 Patch03 release:

Thunderbolt Ethernet Adapter Support

I know there were a couple of questions from folks asking whether the Thunderbolt Ethernet Adapter would be recognized by ESXi on the new Mac Pro 6,1 and I can confirm, it does as shown in the screenshot below:

The Mac Pro 6,1 has two on-board Ethernet ports and comes with 6 x Thunderbolt connections, so you can connect quite a bit of networks if you need to.

GPU Passthru Support

I know a couple of you have asked whether the two Radeon 7870 GPU's could be passthru into a guest OS such as Mac OS X or Windows and it looks like they can from the ESXi point of view, however this is not officially supported by VMware, so YMMV on whether the guestOS can actually make use of the GPU.

For Windows it looks like it was able to properly detect the GPU (as shown in the screenshot) below and for Mac OS X it does not look like it's properly detecting the GPU. I will see if I can investigate this further but there is a good chance that passthru for Mac OS X guest will not work.

If you have made it this far and realize you rather not go through that long process (which is quite short actually), then I you will be quite happy to see that I have done the hard work for you and have created an ESXi 5.5 Update 2 Patch03 ISO which you can download here. Hope you enjoy your new Mac Pro and running ESXi on top of it!

ESXi Support for 2014 Apple Mac Mini 7,1

10.25.2014 by William Lam // 88 Comments

I have received a number of inquires asking whether ESXi can be installed on the latest 2014 Apple Mac Mini 7,1. Unfortunately, some early reports have indicated issues trying to get the latest version of ESXi installed on the Mac Mini and the results are also the same using old releases of ESXi as well. As of right now, VMware Engineering is unable to comment on the issue until they can get their hands on a the latest Mac Mini in house for investigation. If you happen to own the latest Mac Mini and live in the Bay Area and wish to help expedite the process by donating your system for testing, feel free to drop me a note. I will update this blog with new findings as they are made available regarding ESXi and the new Mac Mini's. The answer is yes, you can install the latest release of ESXi 5.5 Update 2 Patch03 and to be able to get the SATA HDD to show up, you will need to install a custom VIB shown below.

UPDATE 3 (11/7) - For those just wanting the latest ESXi 5.5 Update 2 Patch03 + SATA VIB ISO, I have created ESXi-5.5u2p03-MacMini-7-1-HDD.iso that you can just download and install.

UPDATE 2 (11/6) - Thanks to one of our CPD Engineers Charles Monnett, we now have a way for ESXi to detect the HDD located in the new Apple Mac Mini 7,1. It turns out there was a new SATA controller that is being used for the HDD and because it's PCI ID (8086:9c03) was unknown, it was not being claimed by the AHCI driver. Once this was added to the driver map files, ESXi could now see the second drive. Of course, I wanted to simplify this for end users, so I have built a new VIB called vghetto-apple-macmini71-hdd.vib that needs to be installed which can be done by using the following command:

esxcli software vib install -v /vghetto-apple-macmini71-hdd.vib -f

Once the VIB has been installed, go ahead reboot for the changes to take affect. We can now run the following command on the ESXi Shell to confirm that we now see both the SSD and HDD disk OR we can do so using the vSphere C# Client:

esxcli storage core device list

UPDATE 1 (11/5) - It looks like an internal team was able to get their hands on the latest Mac Mini 7,1 and using the latest ESXi 5.5 Update 2 Patch03 image, they were successfully able to install ESXi, however it only recognized the internal SSD (Samsung based) and not the Fusion drive. This will need to be further investigated on why the other device is not being claimed but it looks like as of now, you can at least get stock ESXi installed and use the SSD.

In the mean time, if you are looking to purchase a Mac Mini to run ESXi, I would highly recommend you take a look at some of the platform changes here and here before deciding to purchase. The most significant change in my opinion is the removal of user replaceable memory with soldered in memory! This means that you will NOT be able to upgrade the units after purchasing and you will need to max out the configuration during the initial purchase with Apple. This is one of the unfortunate changes to the Mac Mini platform and I personally would recommend looking at the last release of the Mac Mini's (Late 2012) which will provide the most bang for the buck. For the old Mac Mini's you will most likely have to look on eBay or even Amazon as they are no longer sold by Apple or their retailers.

Disclaimer: Running ESXi on an Apple Mac Mini is not officially supported by VMware, please use at your own risk

A killer custom Apple Mac Mini setup running VSAN

10.21.2014 by William Lam // 12 Comments

*** This is a guest blog post from Peter Bjork ***

The first time I was briefed on VMware VSAN, I fell in love. I finally knew how I would build my Home Lab.

Let me first introduce myself, my name is Peter Björk and I work at VMware as Lead Specialist within the EMEA EUC Practice. I fortunately have the opportunity to limit my focus on a very few products and truly specialize in these. I cover two products; VMware ThinApp and VMware Workspace Portal and one feature; the Application Publishing feature of VMware Horizon 6. I’m an End-User application kind of guy. That said, you should understand that I’m far from your ESXi and vSphere expert. If you want to keep up with the latest news in the VMware End-User Computing space make sure to follow me on Twitter, my handle is @thepeb. When I’m not a guest blogger, I frequently blog on the official ThinApp and Horizon Tech blogs.

In my role I produce a lot of blog posts and internal enablement material. I perform many tests using early code drops and on a daily basis I run my home lab to deliver live demos. I need a Home Lab that I can trust and that supports all my work tasks. I started building my lab many years ago. It all started with a single mid tower white box, but pretty soon I ran into resource constraints. I started to investigate what my next upgrade would look like.

I had a few requirements:

Keep the noise down
Shouldn’t occupy that much space
Should be affordable
Modular, I do not have money to buy everything upfront so it should be something I could build on top of.
Should be able to run VMware ESXi/vSphere
Should be cool

[Read more...]