WilliamLam.com

  • About
    • About
    • Privacy
  • VMware Cloud Foundation
  • VKS
  • Homelab
    • Resources
    • Nested Virtualization
  • VMware Nostalgia
  • Apple

How to recover ESXi installed on USB device after disabling vmkusb module?

01.12.2023 by William Lam // Leave a Comment

I have to say, this is one of the more interesting challenges that I have come across in quite some time. A user was looking for assistance after they accidentally disabled the vmkusb module, which is the USB driver for ESXi and allows it to communicate with USB devices that are connected to the system.

The vmkusb module also plays a very critical role if you have ESXi installed on a USB device, as the driver is required for proper functionality such as being able to save the ESXi state and configurations to the USB device. So what happens when you disable the vmkusb module and you reboot the ESXi host, which is also installed on a USB device?

Well, everything continues to work including VMs since ESXi by design runs in memory after the initial boot from the USB device. However, any configuration changes made after that is lost after a system reboot including the attempt to re-enable the vmkusb module since ESXi is unable save any of the settings to the USB device. Fortunately, I was able to help the user out as I had a few ideas on how we could fully recover from this type of scenario and hence the blog post.

Hopefully a lesson can be learned here, do not make changes or disable things that you are not familiar with 🙂

[Read more...]

Categories // ESXi Tags // ESXi 7.0, ESXi 8.0, usb, vmkdevmgr, vmkusb

No suitable disk was found when upgrading to ESXi 6.5 on USB?

02.08.2017 by William Lam // 10 Comments

I got a question from my buddy Paudie O'Riordan this morning where he was noticing a strange issue while trying to upgrade his ESXi hosts from 6.0 to 6.5 (all on the VMware HCL). Like many of our customers, he runs ESXi on USB device and when he attempted to upgrade using ESXi Scripted Install (Go Automation!), he was surprised to find that his USB device was not being detected.


Interestingly, I had literally just finished answering a similar question on our internal Socialcast forum and I had wondered if Paudie was also seeing the same problem. The issue looks to be related to the new USB Native Driver (vmkusb) that was introduced in ESXi 6.5 where is it is unable to claim the specific USB device.

Although you can disable the USB Native Driver and fall back to the legacy driver as mentioned in this VMware KB 2147650, but because this is happening during the installation/upgrade process, it can get a bit tricky.

[Read more...]

Categories // Automation, ESXi, vSphere 6.5 Tags // ESXi 6.5, usb, vmkusb, vSphere 6.5

Search

Thank Author

Author

William is Distinguished Platform Engineering Architect in the VMware Cloud Foundation (VCF) Division at Broadcom. His primary focus is helping customers and partners build, run and operate a modern Private Cloud using the VMware Cloud Foundation (VCF) platform.

Connect

  • Bluesky
  • Email
  • GitHub
  • LinkedIn
  • Mastodon
  • Reddit
  • RSS
  • Twitter
  • Vimeo

Recent

  • VCF 9.0 Hardware Considerations 05/30/2025
  • VMware Flings is now available in Free Downloads of Broadcom Support Portal (BSP) 05/19/2025
  • VMUG Connect 2025 - Minimal VMware Cloud Foundation (VCF) 5.x in a Box  05/15/2025
  • Programmatically accessing the Broadcom Compatibility Guide (BCG) 05/06/2025
  • Quick Tip - Validating Broadcom Download Token  05/01/2025

Advertisment

Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy

Copyright WilliamLam.com © 2025

 

Loading Comments...