WilliamLam.com

Aquantia 10GbE ESXi Driver for Apple 2018 Mac Mini

by // 30 Comments

I know many of you have been anxiously waiting for ESXi to be fully functional on the latest Apple Mac Mini (2018), unfortunately I do not have any news to share with you on that front. Without help from Apple, we are still challenged with Apple's new T2 chip, which prevents us from accessing the underlying NVMe device.

UPDATE (04/27/20) - Marvell (formally Aquantia) has just released an official Native ESXi Driver for their AQtion based network adaptors which you can find here and for the complete list of supported devices using this driver, please refer to the VMware HCL here.

Having said that, I do have some exciting news regarding the built-in 10Gigabit Ethernet adaptor on the 2018 Mac Mini. The 10GbE adaptor uses an Aquantia chipset, this is also the same chipset used in Apple's high end iMac Pro which was released earlier in the year. Over the past few weeks, I have been working with the Aquantia team and they have successfully ported over their open source Atlantic driver to a VMKlinux driver for ESXi, which they have published here. Although the local NVMe device can not be used to run any VMs, with the network fully enabled, customers could take advantage of this model and connect to IP-based storage to start leveraging the new Mac Mini platform.

The easiest way to incorporate the driver into the latest ESXi release is to use Image Builder within the vSphere H5 Client UI, below are the step-by-step instructions.

[Read more...]

Revisiting prompting for user input during an interactive or scripted install of ESXi

by // 17 Comments

For those that have a need to prompt for additional user input during an installation of ESXi, whether that is an interactive session or using a scripted install (Kickstart) may have noticed the solution posted in my 2015 blog post no longer works with recent releases of ESXi (newer than 6.0).


I was recently contacted by VMTN community cacheman, who authored the original snippet after my 2011 post with an updated solution that would work with newer releases of ESXi (e.g. 6.5 or newer). Thanks to Chris, he discovered the following after taking another look at the initial hack:

It seems that the tty1 techsupport.sh which I had commented out in /etc/inittab is having no effect in these versions and the login prompt is starting on tty1. As far as I can tell this is because for versions >= 6.5, the init process starts before the extras.tgz is unpacked, so it reads the /etc/inittab that comes natively with ESXi rather than the modified one in extras.tgz.

[Read more...]

Supermicro E300-9D (SYS-E300-9D-8CN8TP) is a nice ESXi & vSAN kit

by // 33 Comments

Supermicro kits such as the E200-8D is a very popular platform amongst the VMware community and with powerful Xeon-based CPUs and support for up to 128GB of memory, it is perfect for running a killer vSphere/vSAN setup!

Earlier this Fall, Supermicro released a "big daddy" version to the E200-8D, dubbed E300-9D and specifically, I want to focus on the 8-Core model (SYS-E300-9D-8CNTP) as this system actually listed on the VMware HCL for ESXi! The E300-9D can support up to half a terabyte of memory and with the 8-Core model, you have access to 16 threads. The E200-8D is also a supported platform by VMware, you can find the VMware HCL listing here.


I was very fortunate to get my hands on a loaner E300-9D (8-Core) unit, thanks to Eric and his team at MITXPC, a local bay area shop specializing in embedded solutions. In fact, they even provided a nice vGhetto promo discount code for my readers awhile back, so definitely check it out if you are in the market for a new lab. As an aside, when doing a quick search online, they also seem to be the only ones actually selling the E300-9D (8-Core) system which you can find here and in general, they seem to be priced fairly competitively. This is not an endorsement for MITXPC, but recommend folks to compare all prices when shopping online, especially as today is Black Friday in the US and Cyber Monday is just a few days away.

[Read more...]