WilliamLam.com

NSX-T Edge OVF property to automatically join NSX-T Management Plane

by // 2 Comments

After publishing my vSphere 7 with Kubernetes automation lab deployment script, I was looking at my NSX-T Edge code which leverages the vSphere VM Keystroke API to automate the joining of the the NSX-T Edge to the NSX-T Management Plane. This technique is used to avoid the need for SSH access to both NSX-T Edge and Manager which is the official VMware method as outlined in the documentation for configuring the Edge.

This is certainly unfortunate as most customers normally disable SSH by default and only enable it for troubleshooting/debugging purposes. As far as I know, there are no remote NSX-T APIs for configuring an NSX-T Edge that has been deployed outside of NSX-T Manager, which has its own implications.

I recently had a chance to revisit some research I had made a note of when I had first started working with NSX-T. While inspecting the NSX-T Edge OVA, I found several OVF properties that begin with mp which per the description was referring to the NSX-T Manager. At the time, I was not able to figure out which the required combination of keys and values. Taking a closer look and poking around the appliance and logs, I was able to finally figure out the correct combination which turned out to be easy, once you knew what it was expecting.

To help demonstrate this functionality, I have created a basic PowerCLI script edge-auto-join-nsxt-management-plane.ps1 which uses information from your already deployed NSX-T Manager to automatically deploy the desired number of NSX-T Edge(s) which will automatically join the NSX-T Management Plane upon initial setup.


The way this works is that the following four OVF properties must be filled as part of the NSX-T Edge deployment:

[Read more...]

Really cool updates with OVFTool 4.4 and support for vSphere 7

by // 5 Comments

vSphere 7 has officially GA'ed this morning and with folks starting to download ESXi and the vCenter Server Appliance, do not forget about all the supporting tools such as the latest PowerCLI 12.0 release which includes a number of enhancement as well as the various vSphere Management and Automation SDKs.

One of my most frequently used tools on a daily basis, some times even more than PowerCLI is OVFTool which is now at version 4.4 which officially supports vSphere 7 but it also includes a number of really awesome enhancements and bug fixes. 

While looking over the OVFTool release notes, I noticed a few interesting tidbits that I thought was worth calling out:

OVF Tool now can upload disk files to the host in parallel, and download disk files from the host in parallel. OVA is unsupported. Parallelism is limited by the number of CPUs. See the --parallelThreads=N option in the OVF Tool User's Guide for details.

This is a most welcome feature for customers with extremely large VMs where upload and/or downloads of OVAs can take a considerable amount of time as only a single CPU thread is used. With this feature, you can now enable multiple CPU threads with the --parallelThreads parameter which should really with performance! Even for smaller size VMs, you can still benefit if you have additional CPU resources to allocate and something I will be using going forward!

For multi-disk virtual machines, OVF Tool now includes the --multiDatastore flag to specify datastore per disk. See the OVF Tool User's Guide for details.

This is another welcome feature for customers where you might have an OVA that contains multiple VMDKs and want to explicitly place them on specific datastore.

The ARM64 architecture on Linux is now supported.

Finally, I thought this was very interesting to see that OVFTool has been ported over to ARM64 for Linux which means we can run now run OVFTool on a Raspberry Pi or even an Amazon A1 EC2 Instance! This might come handy in the future and I wonder if OVFTool for ESXi would be the next logical step? 🙂

I highly recommend you check out the rest of the release notes as it contains many more enhancements and fixes, many of which I have reported from the community and/or by our customers. I think this is certainly one of the tools you can upgrade immediately as it has great backwards compatibility with older vSphere releases but you can also take advantage of all the new features mentioned above immediately. If there are other OVFTool improvements or enhancements you really would like to see, feel free to leave a comment along with the use case and I will past that on to Engineering.

Quick Tip - Import OVF/OVA as VM Template using OVFTool 4.3 Update 1

by // 5 Comments

OVFTool is an extremely versatile command-line utility for importing and exporting Virtual Machines to and from the OVF/OVA format and it supports a number of VMware platforms including VMware Cloud on AWS (VMC), vSphere (vCenter Server and ESXi), Fusion, Workstation, Player and even vCloud Director (vCD).

An infrequent asks that I have seen from customers is the ability to deploy an OVF/OVA as a VM Template rather than just a Virtual Machine in a vSphere-based environment. OVFTool has had the ability to deploy to vAppTemplate for vCD-based environments, so it would make sense to also support vCenter Server VM Templates as well. Today, the workflow is a two-step process, deploy the OVF/OVA and then use the vSphere API to convert the VM to a VM Template.

With the latest OVFTool 4.3 Update 1 which was a minor release last year, we now have a new parameter called importAsTemplate which will allow customers to easily import an OVF/OVA directly into as a VM Template. Below is a quick sample using this new option and I am deploying to a VMC-based environment (see this article for requirements when using OVFTool with VMC)

ovftool.exe `
--acceptAllEulas `
--allowAllExtraConfig `
--name=PhotonOS-Template `
--datastore=WorkloadDatastore `
--net:None=sddc-cgw-network-1 `
--vmFolder=Templates `
--importAsTemplate `
C:\Users\william\Desktop\photon-hw13_uefi-3.0-49fd219.ova `
'vi://*protected email*@vcenter.sddc-a-b-c-d.vmwarevmc.com/SDDC-Datacenter/host/Cluster-1/Resources/Compute-ResourcePool/'

Once the upload has completed, we can take a look at our vSphere UI and see that our imported OVA been automatically been converted to a VM Template!