Apple – Page 11

ESXi 6.5 support for Apple Mac Pro 6,1

01.09.2017 by William Lam // 56 Comments

I know several of you have reached out asking about the support for ESXi 6.5 on the Apple Mac Pro 6,1 but as of right now, the Mac Pro 6,1 is currently not supported with ESXi 6.5. I know this is not ideal especially for customers who wish to take advantage of the latest vSphere release. The good news is that VMware is in the process of testing the Apple Mac Pro 6,1 for ESXi 6.5, however there is not an ETA on when this will be completed by.

Some of you might be wondering why this did not happen earlier? The primary reason is that hardware certification for ESXi is actually performed by the hardware vendors. Once a vendor completes the certification for a particular hardware platform or component, they submit the results to VMware and the VMware HCL is updated. If there is a piece of hardware that is not on the VMware HCL today, it is definitely worth reaching out to your hardware vendor to inquire about its status.

In Apple's case, it unfortunate as they do not participate in VMware's Hardware Certification program for ESXi which makes certification challenging. VMware intends to continue to support customers who require the use of Mac OS X Virtualization and will work towards getting the Mac Pro's certified for latest version of vSphere as mentioned earlier. Historically, testing and certifying ESXi for Apple hardware does take an additional amount of time and in some cases, code changes may even be required due to unexpected hardware changes from Apple.

I hope this gives customers some additional insights into how Apple hardware is certified for ESXi. If you would like to see this improved in the future, you may want to reach out to Apple and provide them with your feedback.

Now ... before you close this blog post thinking it is going to take awhile before there is going to be an update regarding ESXi 6.5 and Mac Pro 6,1, please continue reading further 🙂

UPDATE (07/28/2017) - ESXi 6.5 Update 1 just GA'ed yesterday and is fully supported with all current Apple Mac Pro 6,1 (as you can see on the HCL here) and the workaround mentioned below is no longer required. This means you can install ESXi without any modification to the image.

UPDATE (03/25/2017) - VMware has just published the following VMware KB 2149537 which outlines the officially recommended workaround to install ESXi 6.5 onto the Apple Mac Pro 6,1. The VMware HCL has also been updated to include the Apple Mac Pro 6,1 4-Core, 6-Core, 8-Core & 12-Core systems. In a future release of ESXi, the workaround will not be required and ESXi will just install out of the box. This temporarily workaround is to enable customers who wish to run the current version of ESXi 6.5 which includes GA release, 6.5a and 6.5p01.

[Read more...]

VMXNET3 driver now included in Mac OS X 10.11 (El Capitan)+

10.01.2016 by William Lam // 15 Comments

Yesterday I received a pretty interesting comment from one of my Twitter followers @NTmatter who wrote:

@lamw Just noticed that OSX has a VMXNET3 driver. Have to edit the vmx file to actually use it, but it's there! AppleVmxnet3Ethernet.kext

— Thomas Johnson (@NTmatter) September 30, 2016

This is a pretty neat find because currently today, the only network adapter that is functional with an Apple Mac OS X guest running on either VMware vSphere or Fusion is the e1000{e} driver. This update was definitely news to me and after sharing it internally to see if I could find some more details, it turns out this news also came as surprise to the folks internally. Darius, one of the Engineers who I frequently reach out to on Apple related topics did some digging and found out that Apple started to bundle this VMXNET3 driver starting with Mac OS X 10.11 (El Capitan) release. You can find the driver located in /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleVmxnet3Ethernet.kext

Disclaimer: Given that this VMXNET3 Mac OS X driver was not developed by VMware nor has it been tested by VMware, it currently would not be officially supported by VMware.

If you wish to try out the VMXNET3 driver, you will need to install Mac OS X 10.11 or newer on a VM running on vSphere or Fusion. By default, the only available network adapter type is e1000{e}. To add a VMXNET3 network adapter, you can either manually tweak the .VMX file or you can easily add it by using either the vSphere Web/C# Client or ESXi Embedded Host Client. Below are the instructions on configuring the VMXNET3 network adapter for your Mac OS X guests.

Step 1 - Remove the existing network adapter and then temporarily change the GuestOS type to "Other" (no need to save setting, just update it in VM reconfigure wizard) so that you will be allowed to add a VMXNET3 network adapter. Once you have added it to the VM reconfigure wizard, go ahead and toggle back the GuestOS type to Mac OS X 10.10 and then save the settings as shown in the screenshots below.

Step 2 - Open a terminal inside of the Mac OS X guest and run the following command to load the VMXNET3 driver:

sudo kextload /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleVmxnet3Ethernet.kext

Step 3 - You can verify that the VMXNET3 driver was successfully loaded by running the following command:

kextstat | grep -i vmxnet3

Once the driver has been loaded, you should now have networking connectivity to your Mac OS X VM using the VMXNET3 network adapter. Below is a screenshot of the system info showing the VMXNET3 network adapter.

In addition to having an optimized networking when using the VMXNET3 driver, the other benefit is being able to get a link speed of 10GbE which is something customers have been inquiring about when virtualizing Mac OS X guests. Below is a screenshot of the media link shown in this Mac OS X 10.11 guests.

Although this a great development for Apple customers who uses VMware vSphere and Fusion, it also does raise an interesting question on whether Apple would be officially supporting this VMXNET3 driver going forward? If I do receive any more details on this, I will update the article. Until then, you can play with this new capability if you are running Mac OS X 10.11 or greater on VMware. Big thanks to Thomas for this great find and sharing it with the VMware Community!

ESXi Thunderbolt Driver to Fibre Channel Storage from ATTO

09.12.2016 by William Lam // 6 Comments

One of the things I always enjoy doing at VMworld, when I am not running around and I have a few minutes to myself, is to check out the VMware Solutions Exchange. This is where you can learn and interact with hundreds of our VMware Certified Partners showcasing their new solutions and innovations that they have built on top of VMware's products.

UPDATE (08/22/17) - ATTO's ESXi Thunderbolt Driver is now officially on the VMware HCL, please see this blog post here for more details.

While walking through the show floor, I had stopped by the ATTO Technology booth who has been a long time partner of VMware in the storage and networking connectivity space. What caught my eye was that they had just released a Beta of an ESXi Thunderbolt Driver in the form of an ESXi VIB that would allow customers to connect their Apple Mac Pro 6,1 using the Thunderbolt 2 interface to an external Fibre Channel storage array. I believe ATTO might be the first vendor ever to produce a Thunderbolt Driver for ESXi. This is really exciting news if you ask me, especially as more and more of our customers are looking to virtualize Mac OS X guests in their Datacenters using vSphere.

Historically, the only option to connect a Mac Pro 6,1 to an external Fibre Channel array was to use something like a Sonnet Chassis. Now, you can potentially connect up to 6 of the built-in Thunderbolt 2 interfaces on the Mac Pro's to your external storage array using this new solution from ATTO. Before I go into some of the details, ATTO did want me to mention that this solution is currently not officially supported by VMware nor is it on VMware's HCL. ATTO will be providing full support on their software as well as VMware's software stack during the duration of the beta program. In terms of official certification on VMware's HCL, I suspect that it will most likely depend on customer demand which would influence whether ATTO applies for an official certification, which again, would be the first of its kind for Thunderbolt.

The way in which this solution works is that you install the ATTO Thunderbolt Driver on your ESXi host and this will allow it to communicate with an ATTO ThunderLink device which provides the Thunderbolt 2 to Fibre Channel connectivity. You have the option of using either the FC2082 which provides 20Gb/s Thunderbolt 2 (2-port) to 8Gb/s FC (2-Port) Device or the FC2182 which provides 20Gb/s Thunderbolt 2 (2-port) to 16Gb/s FC (2-Port) Device. Below is a diagram from the ATTO digital solution brief on Thunderbolt Driver for ESXi which outlines the configuration.

If you are interested in taking part in ATTO's ESXi Thunderbolt Driver Beta program or would like to learn more about the solution, you can reach out directly to Carllene Mowry (*protected email*) who is running the program. For more information be sure to check out the ATTO digital brief on Thunderbolt Driver for ESXi.

Lastly, I was also fortunate to have a quick chat with Carllene and team to get a few additional exclusive tidbits on some of the things the ATTO team is working on next. The first of which is support for the Thunderbolt 3 (aka USB-C) interface to Fibre Channel which will be quite nice for newer platforms that include that interface, including home lab setups such as the Intel NUC. Speaking of Intel NUC, this is just one of the many other platforms that include either Thunderbolt 2 or 3 interfaces. Although the solution today is specifically supporting the Mac Pro, I know ATTO folks are interested to hear from customers on other systems with Thunderbolt interface and providing similiar capabilities.

The other really exciting development that is currently being investigated is support for Thunderbolt 2 or 3 to 10GbE connectivity on ESXi. As you can imagine, this is really going to open up some really cool new use cases, especially around things like VSAN which can easily benefit from this. It is still in early development but from my understanding, ATTO is already seeing a lot of interest in this area as well as how this might work with VSAN. I am hoping I will be able to share more details as this further develops. If any of these updates sounds interesting, do leave a comment to let the ATTO folks know and I will make sure they monitor the thread.