WilliamLam.com

64GB memory on the Intel NUCs?

by // 62 Comments

I just got my hands on a pair of 32GB SODIMM memory modules (64GB total) which I had been waiting to evaluate since last Fall. Apparently, it has taken some time for these high capacity memory modules to be readily available in the consumer market. Even after the announcement of the new 2018 Apple Mac Mini last year, which officially supports 32GB SODIMMS, I was not aware of any vendors who were selling these modules direct to consumers.


My primary interests in these memory modules was whether they would work on the latest Intel NUCs, specifically the Hades Canyon (NUC8i7HNK) which are the prosumer versions of the standard Intel NUCs that many folks use for vSphere Home Labs. Both the standard and Skull/Hades Canyon NUCs all officially support a maximum of 32GB of memory (2x16GB SODIMM), however it been hypothesized by the community that they *should* in theory be able to go up to 64GB, especially as some of the newer CPUs technically state support for it.

UPDATE (10/30/20) - Thanks to Ariel Sanchez who shared the Crucial 2x32GB SO-DIMM also work with the Intel NUC. It was a killer deal during Amazon Prime week, at $164 for 2x32 (64GB) but as of right now, they are going for $219 which is still cheaper than the Samsung which are going for $120 per 32GB SO-DIMM.

[Read more...]

Touch screen + case for the Raspberry Pi 3

by // 3 Comments

I just purchased a nice little touch screen for my Raspberry Pi 3 (rPI) which I had shared on Twitter yesterday and a number of folks were also interested in the details. First off, I want to give a huge shoutout to Frances Wong who I came to learn about this nifty touch screen in the first place. I noticed that Francis only had the screen adaptor and I was also interested in getting a case that can house both the rPI and the touch screen. After a quick search online, I found there was a companion case which I had also purchased and you can see what it looks like fully assembled below.


[Read more...]

ESXi Native Driver for USB NIC Fling

by // 35 Comments

Today, I am very excited to announce a new Fling that I have been working on which is a Native Driver for ESXi that will enable support for three of the most popular USB network adapter chipsets found in the market today. The ASIX USB 2.0 gigabit network ASIX88178a, ASIX USB 3.0 gigabit network ASIX88179 & the Realtek USB 3.0 gigabit network RTL8153. This effort had initially started back in 2016 as a side project with Songtao, a VMware Engineer who works on our USB stack for ESXi. Based on the enormous amount of feedback from the community as well customer Production use cases, this side project evolved into the development of a full fledge Native Driver for ESXi.

This Fling is more than just adding additional network interfaces for vSphere Home Labs, which is definitely a use case, but it is also about enabling new and future computing platforms that may not always have the traditional network connectivity that we have come to expect. Today, ESXi supports a number of high-end network controllers (10G/40G/100G) designed for Enterprise Data Centers that include advanced networking & low latency features. As more & more workloads appear at the Edge like IoT, point-of-sales & remote office use cases, the traditional networking solutions may no longer meet the needs of these new infrastructures.

For Edge computing environments, reducing the cost & power consumption is definitely one of the driving factors. However, with some of these platforms, their form factors can make it difficult or impossible to support traditional high-end network controllers. Luckily, there are a number of options for network adapters in the market but is can also be difficult to support them all.

USB has become one the most widely adopted connection type in the world & USB network adapters are also popular amongst Edge computing platforms. In some platforms, there is either limited or no PCI/PCIe slots for I/O expansion & in some cases, an Ethernet port is not even available. This Fling will hopefully help enable some of these Edge use cases today and with the help of the community and feedback, we can see how this can be enhanced or evolved over time including where it could even be part of the ESXi distribution.

Another use case for USB-based network adapters as mentioned earlier are for vSphere Home Labs, platforms like the Intel NUC or Apple Mac Mini have limited number of built-in Ethernet ports, but plenty of USB & USB-C ports which can enable these platforms with additional networking capabilities. These systems could also be potential Edge platform candidates given the right connectivity.

For download and instructions, please visit https://labs.vmware.com/flings/usb-network-native-driver-for-esxi