WilliamLam.com

ESXi on a Raspberry Pi

by // 46 Comments

During the closing of the VMworld Europe Keynote on Tuesday, Ray O'Farrell (CTO of VMware) had one more "tiny" surprise for our CEO, Pat Gelsinger 😉 He handed him a tiny little device called the Raspberry Pi (rPI) which was running a prototype version of ESXi! This was completely unexpected even for VMware Employees, especially as we had just announced our ESXi on ARM initiative at VMworld US. You can watch the keynote replay here starting at 1:37:15.

As you can imagine, this created a TON of excitement and buzz at the VMworld but it also sparked some interesting conversations on why VMware would even do this? Was this just a marketing gimmick or was there something more significant in showing that ESXi could run on a rPI?

[Read more...]

Update on running ESXi on Intel NUC Hades Canyon (NUC8i7HNK & NUC8i7HVK)

by // 55 Comments

The Intel NUC is one of the most popular and affordable hardware platform for running vSphere and vSAN Home Labs. For customers that want a bit more computing power, Intel also has their Skull Canyon platform which was released back in 2016 and has also gained in popularity amongst VMware Home Labbers. To be clear, the none of the Intel NUC platforms are on VMware HCL and therefore are not officially supported.

Earlier this year, Intel released their second generation of their higher-end Intel NUCs dubbed Hades Canyon which comes in two flavors NUC8i7HNK and NUC8i7HVK, with the latter being the higher-end unit. Based on the previous generation of hardware, most customers assumed ESXi should just work and went out and purchased the lower-end "HNK" version just to find out that was not case. The ESXi Installer would boot up to a certain point and then stop with the following error:

“Shutting down firmware services…..

Using “simple offset” UEFI RTS mapping policy”

To add to the confusion, this issue was not observed with the higher-end NUC8i7HVK model which was also quite interesting. Over on the nucblog.net, they also confirmed ESXi runs fine on "HVK" model and the issue seems to be isolated to the lower-end "HNK" model.

[Read more...]

Retrieving Apple hardware details (Model, Serial, Board & EFI Boot ROM & SMC Version) from ESXi

by // 3 Comments

For customers who run ESXi on Apple Hardware, retrieving the Apple hardware specific information such as the Board ID, EFI Boot Room and SMC Version for troubleshooting or auditing purposes can be challenging. Historically, this information is only available when running the hardware with an Apple MacOS operating system and customers would have to either boot the system into the MacOS Recovery Mode to run the system profiler tool from the command-line or install a full blown MacOS operating system to retrieve the necessary information as outlined in this Apple KB.

For some customers, this may not even be an option as Apple hardware does not provide any remote management capabilities and customers must physically be in front of the system to perform this process and imagine needing to do this across a fleet of Apple servers. 

While working on a recent case with a customer, I was curious if the Apple specific information could be retrieved from within ESXi and remove the need to boot into MacOS? I reached out to one of the Engineers, Darius Davis, who I work with on a frequent basis when it comes to MacOS-related topics to see if this was possible.

[Read more...]