WilliamLam.com

VMware Cloud Foundation 5.0 running on Intel NUC

by // 10 Comments

Interested in trying out the latest release of VMware Cloud Foundation (VCF) 5.0? Don't have some beefy hardware to meet all the requirements, not to worry! Did you know you can actually deploy a VCF Management Domain using just a single Intel NUC or simliar small form factor system? This is exactly how I kicked the tires with the latest VCF 5.0 release 😎


Disclaimer: This is not officially supported by VMware, please use at your own risk.

Requirements:

  • VMware Cloud Builder 5.0 OVA (Build 21822418)
  • VCF 5.0 Licenses
  • Intel NUC configured with
    • 64GB of memory or more
    • Dual onboard networking ("Tall" NUC like Intel NUC 11 Pro, which is what I used) OR add additional NICs with these Thunderbolt 3 Networking options (no USB NIC)
    • 2 x SSD that are empty for use for vSAN bootstrap (500GB+ for capacity)
  • ESXi 8.0 Update 1a installed on the Intel NUC using USB device
  • Ability to deploy and run the VMware Cloud Builder (CB) Appliance in a separate environment (ESXi/Fusion/Workstation)

Note: While my experiment used an Intel NUC, any system that meets the basic requirements above should also work.

[Read more...]

DDR5 SODIMM capable kits for ESXi

by // 8 Comments

After successfully confirming the new non-binary 48GB DDR5 SODIMM modules (96GB total) is fully functional with any DDR5 capable system, I started receiving questions about which DDR5 kits are currently available today and that can also be used with ESXi?

The ASUS PN64-E1 is definitely a top contender for anyone in the market for a new or updated VMware Homelab and it was also the system that I had used to verify the new DDR5 memory. In addition to the PN64-E1, the following kits listed below from my research also supports DDR5 SODIMM memory and would also be compatible with ESXi.

Note: While there are other DDR5 kits out in the market, especially those with an AMD CPU, they are not viable with ESXi as the onboard networking uses a Realtek network adapter and there are no ESXi drivers from Realtek.

If folks are aware of other kits that are both DDR5 compatible and would also function with ESXi, feel free to share by leaving a comment below.

[Read more...]

ESXi on ASUS PN64-E1

by // 23 Comments

There are not many small form factor kits out there right now that supports Thunderbolt 4, so I was really interested in what ASUS had to offer with their release of the PN64-E1.


I have actually never worked with an ASUS kit before, so I was definitely looking forward to getting my hands on one of this system and see what capabilities it can enable for the VMware community. I initially learned about this platform last year with their PN64, but in speaking with ASUS, they mentioned I should really check out their newest offering, the PN64-E1, which has several new enhancements over their previous model.

So here is your first look at the ASUS PN64-E1!

UPDATE (02/20/25) - 128GB (2x64GB) DDR5 SODIMM memory is fully functional with PN64-E1, please see this blog post for more information.

[Read more...]